Owner's Manual

CONNECTIONS PAGE
11
Connecting
to an Audio
System
You can
listen to the
sound of audio CDs and DVD video discs in
stereo.
S-VIDEO
OUT
DIGITAL
OUT
AUDIO OUT
VIDEO
OUT
1
L
R
2
To audio
inputs
of
the
amplifier
(white)
(red)
Audio
system
To VIDEO OUT
To AUDIO OUT
S-video cable
(supplied)
To S-VIDEO OUT
(yellow)
(red)
R
(white)
L
To video
input (yellow)
To S-video
input
TV or
monitor with
audio/video
inputs
If the TV has an S-video
input,
connect the DVD
player
with the
supplied
S-video cable.
Refer to the owner's manual of
your
audio
system
as well.
When
you
connect the DVD
player
to other
equipment,
be sure to turn off the
power
and
unplug
all of the
equipment
from the
wall outlet before
making
any
connections.
If
you place
the DVD
player
near a tuner or
radio,
the radio broadcast sound
might
be distorted. In this
case,
move the DVD
player away
from the tuner and radio.
The
output
sound of the DVD
player
has a wide
dynamic
range.
Be sure to
adjust
the receiver's volume to a moderate listen-
ing
level.
Otherwise,
the
speakers may
be
damaged
by
a sudden
high
volume sound.
Turn off the receiver before
you
connect or disconnect the DVD
player's power
cord. If
you
leave the receiver
power
on,
the
speakers may
be
damaged.
Warning
Do not set the
Digital
Audio
Output
of this DVD
player
to
"Dolby
Digital"
unless
you
are
connecting
the coaxial
digital
audio
jack
of
this DVD
player
to an AV decoder that has the
Dolby
Digital
(AC-3)
decoding
function.
High
volume sound
may
damage
your
hear-
ing
as well as the
speakers. (Refer
to
"Selecting Digital
Audio
Output"
on
page
36.)
Notes