ENGLISH ESPAÑOL ITALIANO OWNER’S MANUAL DVD Player with Digital Tuner Please read this manual carefully before operating your set and retain it for future reference.
Getting Started 3 Safety Information CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Getting Started This device is equipped with a portable battery or accumulator. 1 Getting Started Safety way to remove the battery or the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points.
Table of Contents Table of Contents 1 Getting Started 3 6 6 6 6 6 7 7 8 9 9 Safety Information Introduction – About the “7” Symbol Display – Symbols Used in this Manual – Supplied Accessories – Playable Discs – File compatibility – Regional Code Remote control Front panel Rear panel 2 Connecting 10 10 10 10 11 11 11 12 12 12 Connecting to your TV – Connecting antenna – Connecting Video / Audio cable – Connecting SCART cable – Connecting Component Video cable – Connecting HDMI cable – Resolution Sett
Getting Started Introduction Playable Discs DVD-VIDEO (8 cm / 12 cm disc) 1 About the “7” Symbol Display Getting Started “7” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific media. Symbols Used in this Manual A section whose title has one of the following symbols are applicable only to the disc or file represented by the symbol.
Getting Started File compatibility 7 Photo Files Photo size: Less than 2M recommended. Overall yy The file name is limited to 35 characters. yy Depending on the size and number of the files, it may take several minutes to read the contents on the media. Maximum Files/Folder: Less than 600 (total number of files and folders) yy Progressive and lossless compression photo image files are not supported. ,,Note of USB Device yy Do not extract the USB device during operation (play, etc.).
Getting Started Remote control 1 Getting Started • • • • • • c • • • • • • A-B: Repeats a section. MODE: Switches a operation mode (DVB-T, DAB or Disc). PROGRAM: Enters the program edit mode. CH (+/-): Scans up or down through memorized channels in DVB-T or DAB mode. CLEAR: Removes a track number on the Program List DVD MENU: Accesses or exits the DVD menu. CH LIST: Displays the channel list. SUBTITLE (]): Selects a subtitle language. FAV. (+/-): Tunes to your favorite channels.
Getting Started 9 Front panel 1 a Disc Tray f C/V*1 (Skip) b Remote Sensor g Z*2 (Stop) c Display Window h 1 (Power) d B (Open/Close) i USB Port e d (Play) *1 CH(+/-): Scans up or down through memorized channels in DVB-T or DAB mode.
Connecting Connecting to your TV Connect the VIDEO/AUDIO OUTPUT on the unit to VIDEO/AUDIO IN on TV with A/V cable, such as VIDEO with yellow, AUDIO Left/Right with white/ red. Connecting antenna Antenna connection 2 Connecting Video / Audio cable Connecting Connect the Terrestrial TV antenna to the ANTENNA IN jack on the unit.
Connecting Connecting Component Video cable Connect the COMPONENT/PROGRESSIVE SCAN OUTPUT jacks on the unit to the corresponding input jacks on the TV using Component video cable, such as Y with green, Pb with blue, and Pr with red. 11 Additional Information for HDMI yy When you connect a HDMI or DVI compatible device, make sure of the following: -- Try switching off the HDMI/DVI device and this unit. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this unit.
Connecting Connecting to an Amplifier Connecting Audio cable 2 Connect the AUDIO OUTPUT on the unit to 2CH AUDIO IN on amplifier with Audio cable, such as AUDIO Left/Right with white/red. yy If your TV is not capable of handling 96 kHz sampling frequency, set the [Sample Freq.] option to [48 kHz] on the setup menu. yy If your TV is not equipped with Dolby Digital and MPEG decoder, set the [Dolby Digital] and [MPEG] options to [PCM] on the setup menu.
Connecting 13 General about digital broadcast Picture and sound Digital TV is a transmission technology that replaces the traditional analogue technique. Coverage Before buying this product it is anticipated that you have made sure that there are digital transmissions covering your region. Antenna / Signal source Depending on the reception your unit may be connected to a simple indoor antenna or to an existing outdoor antenna system.
System Setting Settings When the unit is turned-on at the first time, you have to select the desired language. Adjust the Setup Settings You can change the settings of the unit in the [Setup] menu. 1. Press SETUP. 2. Use w/s to select the first setup option, and press d to move to the second level. 3 3. Use w/s to select a second setup option, and press d to move to the third level. System Setting 4. Use w/s to select a desired setting, and press ENTER (b) to confirm your selection.
System Setting [AUDIO] Menu [OTHERS] Menu Dolby Digital / DTS / MPEG B.L.E (Black Level Expansion) Set the unit’s Audio options according to various disc output type you use. To select the black level of playback pictures, set your preference and monitor’s ability. It just operates when TV system is set to NTSC. Sample Freq. (Frequency) Selects the sampling frequency of the audio signal between [48kHz] and [96kHz].
System Setting DVB-T or DAB settings When the first time to turn on the unit, the “First time installation” menu will appear. Select [YES] and press ENTER (b) for auto channel scanning. (see “ Auto Scan” below for details) Channel Class This option allows you to set the favorite channel. Use w/s select the a channel and press ENTER (b) to set the favorite class on each channel. (shows Fav icon on top of the screen) Adjust the DVB-T or DAB Settings 1. Press MODE to select the DVB-T or DAB mode. 2.
System Setting Aspect Ratio Change Pin Selects the aspects ratio of the connected TV. Changes the password. Enter the new password twice after entering the current password. [4:3 PS]: Select this when connecting to a standard 4:3 screen TV and prefer the wide picture on the entire screen cuts off the portions that do not fit. [4:3 LB]: Select this when connecting to a standard 4:3 screen TV and prefer the wide picture with bands on the upper and lower portions of the screen.
System Setting [OTHERS] Menu OTA (Over the Air) Your unit is able to keep the built-in digital tuner up to date with the latest software. The unit does it automatically at regular interval. While the unit is in updating, there may have a disruption in reception for a few hours. The reception should return to normal after the update is complete. This unit must be plugged into AC power to receive updates. Do not unplug your unit while an update is in progress.
System Setting The digital EPG Using the digital EPG 1. Press MODE to select the DVB-T or DAB mode. 2. Press EPG to display the EPG menu. 3. Use w/s/a/d to select a program. About the digital EPG Note that the unit’s clock must be set to the correct time and date to ensure all relevant EPG information is displayed.
Operating Selecting teletext page Enter the desired page number as a three digit number with the numbered buttons. If during selection you press a wrong number, you must complete the three digit number and then enter the correct page number again. Use Red/Green buttons to move up and down pages. Special Teletext Functions MIX button Displays the teletext pages superimposed on the TV picture. To switch the TV picture off press this button again.
Operating On-Screen display ry General operation You can display and adjust various information and settings about the content. To Do this Playback Press PLAY (z) Pause Press PAUSE/STEP (M) Stop Press STOP (Z) 1. While playback, press DISPLAY to show various playback information. 2. Select an option using w/s. 3. Use a/d and numerical button to adjust the selected option value. 4. Press RETURN(x) to exit the On-Screen display.
Operating Advanced Playback Watch an During playback or pause mode, enlarged video press ZOOM repeatedly to select zoom mode. ZOOM: 100% : 200% : 300% : 400% : 100% w/s/a/d: Move through the zoomed picture. Movie ry To Do this Display disc menu Press DVD MENU. (DVD Only) Play repeatedly Press REPEAT during playback. To select an option to be repeated, Press REPEAT repeatedly.
Operating 23 Photoi To Do this View photo files as a slide show Use w/s/a/d to highlight (`) icon then press ENTER (b) to start slide show. Adjust slide show speed You can change slide show speed using a/d when (J) icon is highlighted. Rotate a photo Use w/s to rotate the photo in full screen counterclockwise or clockwise while viewing a photo in full screen. Watch an While viewing a photo in full enlarged Photo screen, press ZOOM repeatedly to select zoom mode.
Troubleshooting Troubleshooting Symptom Cause No power The power cord is disconnected. Plug the power cord into the wall outlet securely. The power is on, but the unit does not work. No disc is inserted. Insert a disc. The unit does not start playback. An unplayable disc is inserted. Insert a playable disc. (Check the disc type and regional code.) The rating level is set. Change the rating level. The remote control The remote control is not does not work properly.
Appendix 25 Area Code List Choose an area code from this list.
Appendix Language Code List Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].
Appendix 27 Specifications AC 200-240 V, 50 / 60Hz Power consumption 11 W Dimensions (W x H x D) (430 x 35 x 195) mm Net Weight (Approx.) 1.7 kg Operating temperature 5 °C to 35 °C Operating humidity 5 % to 90 % Laser Semiconductor laser Signal system PAL/NTSC Bus Power Supply (USB) DC 5V 0 500 mA ANTENNA IN Antenna input, 75 Ω VIDEO OUTPUT 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 / SCART (TO TV) COMPONENT / PROGRESSIVE SCAN OUTPUT (Y) 1.