V1310MZ.NA1ULZ_ENG Installation and Operating Guide | Warranty Model Number | XBV613 | DVD Player + Video Cassette Recorder For service/ support Call: Toll Free Number 1-800-243-0000 © Copyright 2005, LG Electronics U.S.A., Inc.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for installation, use, and servicing.
Contents Introduction . . . . . . . . . . . . . . . . . . . . .5-9 Operations - VCR . . . . . . . . . . . . . .19-25 Moisture Condensation . . . . . . . . . . . . . . . . . .5 Symbol Used in this Manual . . . . . . . . . . . . .5 VCR Tape Playback . . . . . . . . . . . . . . . . .19-20 Basic Instructions . . . . . . . . . . . . . . . . . . . . .19 Auto Tracking . . . . . . . . . . . . . . . . . . . . . . . .19 Manual Tracking . . . . . . . . . . . . . . . . . . . . . .19 Search . . . . . . . . . . . . .
To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference. This manual provides information on the operation and maintenance of your DVD+VCR. Should the unit require service, contact an authorized service location. Moisture Condensation Never operate the DVD+VCR immediately after moving it from a cold location to a warm location. Leave it for two or three hours without operating it.
Types of Playable Discs DVD (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) In addition, this unit plays DVD±R/RW and CD-R/RW that contains audio titles, MP3, WMA, DivX and/or JPEG files. This indicates a product feature that is capable of playing DVD-RW discs recorded with Video Recording format. Notes: • Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit.
a b DVD c a d e VCR REC PM TV f Disc Tray (DVD deck) g h i jk lm g Insert a disc here. b Cassette Compartment (VCR deck) h Switches the DVD+VCR ON and OFF. d V/v v) CH (V Z DVD Opens or closes the disc tray. f Display Windows DVD The DVD deck is selected. j Indicates when the Progressive scan is active. Indicates repeat mode. k VCR The VCR deck is selected. REC DVD+VCR is Recording. (VCR part only) PM Indicates PM time. (AM is not displayed.) TV Lights when TV mode is active.
Remote Control CLK/CNT Switches between the clock, tape counter and tape remaining modes on the display. DISC MENU Accesses menu on a DVD disc. SETUP/MENU Accesses or removes DVD Setup menu and VCR menu. b B v V Selects menu options. v/V V) Selects VCR channels. Adjusts CH/TRK(v manually the tape’s picture onscreen. ENTER/OK Confirms menu selections. Displays functions on the TV screen. O) RETURN (O Removes the setup menu. PAUSE/STEP (X) Pause playback or recording.
Introduction Rear Panel Caution Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. a a b c de g h f i ANT.IN f Connect the VHF/UHF/CATV antenna to this terminal. b VCR IN LINE 1 (VIDEO/AUDIO (Left/Right)) Connect the audio/video output of an external source (Audio system, TV/Monitor, VCR, Camcorder). c d AC Power Cord Plug into the power source. g RF. OUT Connect to a TV with RF coaxial inputs.
Connecting an Antenna or Cable TV To view or record a CATV channel 1 Tune the TV to the DVD+VCR output channel (CH 3 or 4). a Antenna: Disconnect the antenna from the rear of the TV and identify the antenna cable. If it is a round 75 ohm coaxial cable connect it directly to the jack marked ANT.IN on your DVD+VCR. If your antenna cable is flat connect it to a 300-ohm to 75-ohm antenna adaptor (not supplied) and slip the adaptor over the ANT.IN jack. Don’t attempt to screw it into to the DVD+VCR.
RF coaxial connection Optional TV Connections Connect the RF.OUT jack on the DVD+VCR to the antenna in jack on the TV using the supplied 75-ohm Coaxial Cable (R). These connections support only DVD playback. The tuner and VCR still output through the RF.OUT (R) or DVD/VCR OUT (A, V) jacks. How to set the DVD+VCR’s RF output channel S-Video connection 2. Press CH (V/v) to change the RF output channel (RF03 or RF04). Tune the TV to this channel. 3. Turn off the DVD+VCR. Audio/Video connection 1.
Connection to an Amplifier Rear of DVD+VCR You can only listen to DVD playback using COAXIAL (X) and AUDIO OUT (A2) connections. The tuner and VCR will still be heard through the RF.OUT (R) or DVD/VCR AUDIO OUT (A1) jack. (See page 10.
By using the VCR Setup menu, you can make various adjustments to items such as clock setting, and timer recordings. Your DVD+VCR allows remote control adjustment of several features. General Operation 1. Press VCR on the remote control. 2. Press MENU and the MAIN menu will appear. • AUTO CLOCK SET The Auto Clock Set feature is set to ON at the factory. In the ON setting, the DVD+VCR looks for a channel carrying XDS (Extended Data Services) information.
TUNING SETUP This DVD+VCR is equipped with a frequency synthesized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and CATV channels 1-125. Auto Channel Programming FUNCTION OSD The on-screen display can be turned on or off. AUDIO MODE 1. Choose the SOURCE SELECT option, then use b / B to select TUNER. Use b / B to switch among TUNER, LINE1, and LINE2. 2. Choose the AUTO CHANNEL SET option, then use b / B to find channels.
You can display various information about the disc loaded on-screen. 1. Press DISPLAY to show various playback information. The items displayed differ depending on the disc type or playing status. 1/3 1 / 12 0:20:09 ABC 1 ENG 1/1 3D SUR 2. You can select an item by pressing v / V and change or select the setting by pressing b / B.
LANGUAGE Progressive Scan Progressive Scan Video provides the highest quality pictures with less flickering. If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On. To turn on progressive scan: Menu Language Select a language for the VCR and DVD’s setup menu and information display.
AUDIO OTHERS Each DVD disc has a variety of audio output options. Set this unit’s AUDIO options according to the type of audio system you use. Auto Play Bitstream: Select “Bitstream” if you connect the DVD+VCR’s DIGITAL AUDIO OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder. PCM (for Dolby Digital / MPEG): Select when connected to a two-channel digital stereo amplifier. DVDs encoded in Dolby Digital or MPEG will be automatically downmixed to two-channel PCM audio.
LOCK (Parental Control) 4. Press ENTER/OK to confirm your rating selection, then press SETUP/MENU to exit the menu. 5. Press OPEN/CLOSE (Z) to activate parental control. Password (Security Code) You can enter or change password. 1. Select “Password” on the LOCK menu then press B. Rating Some movies contain scenes that may not be suitable for children to view. Many of these discs contain parental control information that applies to the complete disc or to certain scenes on the disc.
Operations - VCR Manual Tracking VCR Tape Playback To manually adjust the tracking use the CH/TRK (v/V) buttons on the remote control or CH (v/V) on the front panel during playback. Press the VCR button to select the device to be operated. Notes: Basic Instructions • Vertical jitter requires a very fine adjustment. • Tracking is automatically reset to normal when the tape is ejected or the power cord is unplugged for more than 3 seconds. 1. Turn on the TV. 2.
Slow Motion 1. While in still mode, press FORWARD (M). The tape is played at a speed 1/19 times slower than the normal speed. 2. Use CH/TRK (v/V) on the Remote Control if necessary to adjust the tracking. 3. To return to the normal speed, press PLAY (N). Notes: • During slow motion, audio is muted and horizontal lines (noise bars) may appear on the TV screen.This is normal. • After 3 minutes in SLOW MOTION mode the DVD+VCR goes back to PLAY mode to protect the tape and video heads. 2.
Basic Instructions 1. Turn on the DVD+VCR and TV. 2. Tune the TV to the DVD+VCR output channel (CH 3 or 4) or if a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV, set the TV’s source selector to VIDEO. 3. Insert a video cassette with the safety tab intact. 4. Select the desired channel using CH/TRK (v/V). 5. If you are recording from another source via audio/video input jacks (at the rear or front panel), select LINE1 or LINE2 using INPUT. 6.
CHANNEL: Select a TV channel, LINE1 or LINE2. If you have CABLE TV and use a cable box (converter) you must set the channel to match the cable box output channel (usually CH 3 or 4). Change channels on the cable box instead of with the DVD+VCR. If you use a cable converter, you can program multiple recordings only on the converter box output channel. This is because the converter determines what channel you view through your DVD+VCR.
Instant Timer Recording Extending the Recording Time With this feature you can record for a preset length without using the program timer. The recording time can be extended anytime by pressing REC/ITR (z). Subsequent presses result in advancing the recording time by 30-minute increments. 1. Turn on DVD+VCR and the TV. 2. Be sure the TV is tuned to the DVD+VCR output channel (CH 3 or 4). If a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV, set the TV’s source selector to VIDEO.
Each press of the ENTER/OK changes the TV screen in the following sequence. Copying from DVD to VCR You can copy the contents of a DVD to a VHS tape. STOP CH 4 SP 1. Insert the disc you wish to copy into the DVD deck and close the disc tray. STEREO APR 30 , SAT 2:15 PM 2. Insert a blank VHS video tape into the VCR deck. 2:15 PM 3. Find the place on the DVD from which you want to start dubbing using the PLAY, FF, REW and PAUSE functions.
Additional VCR Information S-VHS Quasi Playback (SQPB) • • This DVD+VCR can play back S-VHS recorded tapes, however, it cannot make recordings using S-VHS format tapes. • SQPB is an abbreviation for S-VHS Quasi Playback. • During manual recording, timer recording, Instant Timer Recording, playback, or fast forward modes, the DVD+VCR automatically starts rewinding the tape at the end of the tape. The cassette stops at the beginning of the tape and is ejected.
Operations - DVD Playback Setup Turn the TV on and select the video input source connected to this unit. Audio System: Turn the Audio System on and select the input source connected to this unit. 1. Press OPEN/CLOSE (Z) to open the disc tray. 2. Load your chosen disc in the tray with the playback side down. 3. Press OPEN/CLOSE (Z) to close the tray. Playback starts automatically. If playback does not start, press PLAY N. In some cases, the disc menu might appear instead.
Buttons Operations ZOOM During playback or pause mode, press ZOOM to enlarge the video image (4 steps). You can move through the zoomed picture using b B v V buttons. Press CLEAR to exit. Note: Zoom may not work on some DVDs. DVD DIVX RANDOM During playback or in stop mode, press RANDOM for random playback. ACD MP3 TITLE If the current DVD title has a menu, the title menu appears on the screen. Otherwise, the disc menu may appears. DVD DISC MENU The disc menu appears on the screen.
Marker Search DVD DivX To enter a Marker You can start playback from up to nine memorized points. To enter a marker, press MARKER at the desired point on the disc. The Marker icon appears on the TV screen briefly. Repeat to enter up to nine markers. To Recall or Clear a Marked Scene 1. During disc playback, press SEARCH. The marker search menu appears on the screen. 2. Within 10 seconds, press b / B to select a marker number that you want to recall or clear. 3.
Playing an Audio CD or MP3/WMA file This unit can play Audio CDs or MP3/WMA files recorded media. MP3/ WMA/ Audio CD Once you insert an MP3/WMA files recorded media or Audio CD, a menu appears on the TV screen. Press v / V to select a track/file then press PLAY or ENTER/OK and playback starts. You can use variable playback functions. Refer to page 26-28. Programmed Playback The program function enables you to store your favorite tracks from any disc in the player memory. A program can contain 30 tracks. 1.
V iewing a JPEG Disc Slide Show Using this DVD+VCR you can view discs with JPEG files. Use v V b B to highlight the press ENTER/OK. 1. Insert a disc and close the tray. The PHOTO menu appears on the TV screen. Still Picture JPEG (Slide Show) then JPEG 1. Press PAUSE/STEP (X) during slide show. The player will now go into PAUSE mode. 2. To return to the slide show, press PLAY (N) or press PAUSE/STEP (X) a gain. Moving to another File JPEG Press SKIP (> or .
Playing a DivX Movie file Using this DVD+VCR, you can play DivX file. 1. Insert a DivX file recorded media. The MOVIE menu appears on the TV screen. DivX disc compatibility with this player is limited as follows: • Available resolution size of the DivX file is under 720x576 (W x H) pixel. • The file name of the DivX subtitle is available by 56 characters. • If there is impossible code to express in the DivX file, it may be displayed as “ _ ” mark on the display.
Playing a DVD VR format Disc This unit will play DVD-R/RW discs recorded using the DVD-Video format that have been finalized using a DVD-recorder. • This unit will play DVD-RW discs recorded using the Video Recording (VR) format. 1. Insert a disc and close the tray, It start playing automatically. 2. The DVD-VR menu appears on the TV screen when you press DISC MENU buttons while playing. Maintenance and Service Refer to the information in this chapter before contacting a service technician.
Reference Language Codes List Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Cause Symptom No power. The power cord is disconnected. Plug the power cord into the wall outlet securely. The power is on, but the DVD+VCR does not work. DVD or VCR button is not switched properly. Refer to page 6. No disc is inserted. No tape is inserted. Insert a disc or tape. (Check that the disc or tape indicator in the display window is lit.
An unplayable disc is inserted. Insert a playable disc. (Check the disc type and Regional code.) The disc is placed upside down. Place the disc with the playback side down. The disc is not placed within the guide. Place the disc on the disc tray correctly inside the guide. The disc is dirty. Clean the disc. The Rating level is set. Cancel the Rating function or change the rating level. Video tape cannot be inserted.
Specifications General Power requirements Power consumption Dimensions (approx.) Weight (approx.) Operating temperature Operating humidity Signal system 120V, 60 Hz 16 W 16.9" X 3.1" X 10.4" (430 X 78.5 X 265 mm) (w x h x d) 9.24 lbs (4.2 kg) 5˚C to 40˚C (41˚F to 104˚F) 5 % to 90 % NTSC Inputs ANTENNA IN VHS VIDEO IN(LINE1, 2) VHS AUDIO IN(LINE1, 2) 75 ohms (VHF/UHF/CATV) 1 V (p-p) 75 ohms, sync negative, RCA jack x 2 -6.
ZENITH LIMITED WARRANTY-USA Zenith will repair or replace your product, at Zenith’s option, if it proves to be defective in material or workmanship under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date (“Date of Installation”) of original consumer purchase of the product. This warranty is good only to the original purchaser of the product and effective only when used in the United States, excluding U.S. Territories.