Owner's Manual

25
Symptom
No
power.
The
power
is
on,
but
the DVD
player
does
not work.
No
picture.
No sound.
The
playback picture
is
poor.
The DVD
player
does
not start
playback.
The remote control
does not work
properly.
Possible Cause
?
The
power
cord is disconnected.
?
No disc is inserted.
?
The TV is not set to receive DVD
signal output.
?
The video cable is not connected
securely.
?
The connected TV
power
is turned off.
?
The
equipment
connected with the
audio cable is not set to receive DVD
signal output.
?
The audio cables are not connected
securely.
?
The
power
of the
equipment
connected
with the audio cable is turned off.
?
The AUDIO
options
are set to the
wrong position.
?
The disc is
dirty.
?
No disc is inserted.
?
An
unplayable
disc is inserted.
?
The disc is
placed upside
down.
?
The disc is not
placed
within the
guide.
?
The disc is
dirty.
?
The
rating
level is set.
?
The remote control is not
pointed
at
the remote sensor on the DVD
player.
?
The remote control is too far from the
DVD
player.
?
There is an obstacle in the IR
path
between
the remote control and the DVD
player.
?
The batteries in the remote control are
exhausted.
Correction
?
Plug
the
power
cord into the wall outlet
securely.
?
Insert a disc.
(Check
that the DVD or
audio CD indicator in the
display
window is
lit.)
?
Select the
appropriate
video
input
mode on the TV.
?
Connect the video cable
securely.
?
Turn on the TV.
?
Select the correct
input
mode of the
audio receiver so
you
can listen to the
sound from the DVD
player.
?
Connect the audio cable
securely.
?
Turn on the
equipment
connected with
the audio cable.
?
Set the
Digital
Audio
Output
to the
correct
position,
then turn on the DVD
player again by pressing
POWER.
?
Clean the disc.
?
Insert a disc.
(Check
that the DVD or
audio CD indicator in the DVD
display
is
lit.)
?
Insert a
playable
disc.
(Check
the disc
type,
color
system,
and
regional code.)
?
Place the disc with the
playback
side
down.
?
Place the disc on the disc
tray
correctly
inside the
guide.
?
Clean the disc.
?
Cancel the
rating
function or
change
the
rating
level.
?
Point the remote control at the remote
sensor of the DVD
player.
?
Operate
the remote control closer to
the DVD
player.
?
Remove the obstacle.
?
Replace
the batteries with new ones.
Troubleshooting