Owner's Manual

11
Installation and Setup
LANGUAGE
Menu
Language
Select a
language
for the
Setup
menu and on-screen
display.
Disc
Audio /
Subtitle
/ Menu
Select the
language you prefer
for the audio track
(disc audio),
subtitles,
and the disc menu.
Original
--
Refers to the
original language
in which
the disc was recorded.
Other
--
To select another
language, press
number
buttons then ENTER to enter the
corresponding
4-
digit
number
according
to the
language
code list
on
page
20. If
you
enter the
wrong language
code,
press
CLEAR.
DISPLAY
TV
Aspect
4:3
--
Select when a standard 4:3 TV is connected.
16:9
--
Select when a 16:9 wide TV is connected.
Display
Mode
Display
Mode
setting
works
only
when the TV
Aspect
mode is set to "4:3".
Letterbox
--
Displays
a wide
picture
with bands on
the
upper
and lower
portions
of the screen.
Panscan
--
Automatically displays
the wide
picture
on the entire screen and cuts off the
portions
that
do not fit.
Progressive
Scan
Progressive
Scan Video
provides
the
highest quality
pictures
with less
flickering.
If
you
are
using
the
Component
Video
jacks
for
connection to a TV or monitor that is
compatible
with
a
progressive
scan
signal,
set
Progressive
Scan to
On.
To Turn ON
progressive
scan:
Connect
component
out of the DVD to the
input
of
your
monitor/television,
set
your
television or monitor
to
Component Input.
1. Select
"Progressive
Scan" on the DISPLAY menu
then
press
B.
2. Select "On"
using
the v /
V
buttons.
3.
Pressing
ENTER will set the
player
to
Progressive
scan mode.
Caution:
Once the
setting
for
progressive
scan
output
is
entered,
an
image
will
only
be visible on a
progressive
scan
compatible
TV or monitor. If
you
set
Progressive
Scan to On in
error,
you
must reset the unit.
First,
remove the disc in the DVD
Player.
Next,
press
STOP
on the remote control
(
x
)
and hold it for five
seconds before
releasing
it. The video
output
will be
restored to the standard
setting,
and a
picture
will
once
again
be visible on a conventional
analog
TV or
monitor.
TV
Output
Select
Set the
player's
TV
Output
Select
options according
to
the TV connection
type.
YPbPr
--
When
your
TV is connected with the
COMPONENT VIDEO OUT/PROGRESSIVE
SCAN
jacks
on the DVD
player.
RGB
--
When
your
TV is connected with the
SCART
(RGB signal) jack.