Owner's Manual

9
Audio
Connection
to
Optional
Equipment
Connect
the
DVD
player
to
your
optional
equipment
for
audio
output.
Amplifier
equipped
with
2-channel
analog
stereo
or
Dolby
Pro
Logic
ll
/
Pro
Logic:
Connect
the
left
and
right
AUDIO
OUT
jacks
on
the
DVD
player
to
the
audio
left
and
right
IN
jacks
on
your
amplifier,
receiver,
or
stereo
system,
using
the
audio
cables
(A).
Amplifier
equipped
with
2-channel
digital
stereo
(PCM)
or
audio
/
video
receiver
equipped
with
a
multi-channel
decoder
(Dolby
DigitalTM,
MPEG
2,
or
DTS):
Connect
one
of
the
DVD
Player's
DIGITAL
AUDIO
OUT
jacks
(COAXIAL
X)
to
the
corresponding
in
jack
on
your
amplifier.
Use
an
optional
digital
(COAXIAL
X)
audio
cable.
Digital
Multi-channel
sound
A
digital
multi-channel
connection
provides
the
best
sound
quality.
For
this
you
need
a
multi-channel
audio
/
video
receiver
that
supports
one
or
more
of
the
audio
formats
supported
by
your
DVD
player
such
as
MPEG
2,
Dolby
Digital
and
DTS.
Check
the
receiver
manual
and
the
logos
on
the
front
of
the
receiver.
Notes:
?
If
the
audio format
of
the
digital
output
does
not
match
the
capabilities
of
your
receiver,
the
receiver
produces
a
strong,
distorted
sound
or
no
sound
at
all.
?
Six
Channel
Digital
Surround
Sound
via
a
digital
connection
can
only
be
obtained
if
your
receiver
is
equipped
with
a
Digital
Multi-channel
decoder.
AUDIO
INPUT
DIGITAL
INPUT
COAXIAL
Amplifier
(Receiver)
Rear
of
DVD
player
A
X
Manufactured
under
license
from
Dolby
Laboratories.
"Dolby",
"Pro
Logic",
and
the
double-D
symbol
are
trademarks
of
Dolby
Laboratories.
DTS
and
DTS
Digital
Out
are
trademarks
of
Digital
Theater
Systems,
Inc.