Manual

ManualsBrandsLG ManualsComputer HardwareE2242T-BN

Summary of content (31 pages)

PAGE 1
@ LG Life's Good OWNER'S MANUAL LED LCD MONITOR Please read this manual carefully before operating your set and retain it for future reference. LED LCD MONITOR MODEL £19425 £20427 E2042S5 E2242T £22425 E2342T £24427 www.lg.
PAGE 2
bas 2 TABLE OF CONTENTS CONTENTS 3 ASSEMBLING AND PREPARING 21 SPECIFICATIONS 3 Unpacking 21 E19428 4 Parts and buttons 22 E0428 3 Setting up the Monitor set 23 Ez0427 5 Attaching the Stand Base 24 ER2428 5 Detaching the Stand Base 25 ER242T & Mounting on a table 26 E23427 6 ~ Using the cable holder 27 E2442T7 8 ~ Mounting on a wall 28 Preset Modes (Resolution) 23 Indicator 9 USING THE MONITOR SET 9 Connecting PROPER POSTURE ¢ D-SUB connection 30 Proper posture for using the Monitor sel.
PAGE 3
ASSEMBLING AND PREPARING 3 ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. if there are any missing accessories, contact the focal dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. DVD Cable Downer's Manual) / 0.SUB Cable (E2042T/E2242T/E23427T/ Card £24427) {This cable is not included in all countries.
PAGE 4
ASSEMBLING AND PREPARING Parts and buttons bas Power Indicator + Lighting Or: Fumed on + Lighting Off Turned off & (Power Button) Button (See p 11} amen own 2 Connection panel (See p.
PAGE 5
ASSEMBLING AND PREPARING B Setting up the Monitor set Detaching the Stand Base Attaching the Stand Base 1 Place the Monitor sel with the screen side down on a flat and cushioned surface. 1 Place the Monitor set with the screen side down on a flat and cushioned surface. 2 8B Pull cut the Stand Body and Stand Base from the monitor set. -/A CAUTION 3 Tum the screw to the left with a coin. Lay a foam mat of soft protective cloth & Pull out the Stand Base. on the surface to protect the screen from damage.
PAGE 6
ASSEMBLING AND PREPARING Mounting on a table 4 Lift and tilt the Monitor set into its upright position on a table, bas Leave a 10 cm (minimum) space from the Walt for proper ventilation. 2 Connect the AC-DC Adapter and Power Cord fo a wall outlet. 3 Press ¢h(Power) button on the bottom switch panel to tun the power on. . A CAUTION Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur.
PAGE 7
ASSEMBLING AND PREPARING Ab warning Her you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers. Do not touch or press the screen when adjusting the angle of the monitor. Do not hold this set like below picture. Monitor screen can detach from stand base and injure your body. Tilt from +20 to -8 degrees up or down to adjust the angle of the Monitor set to slut your view.
PAGE 8
bas 8 ASSEMBLING AND PREPARING Mounting on a wall Model £19425 |[E20427| [£24427 £20425 E2242T E22425 1 E2342T For proper ventilation, allow a clearance each side and from the wall. Detailed instructions are available from your dealer, see the VASE 100 x 100 optional Tilt Wall Mounting Bracket Installation and Standard 4 Setup Guide. screw Numbers of 4 screws AN CAUTION = Disconnect the power cord first, and then move of install the Monitor set. Otherwise electric shock may occur.
PAGE 9
USING THE MONITOR S87 USING THE MONITOR SET Connecting Your Monitor set supports Plug & Play™ “Plug & Play: A PG recognizes a connected device that users connect to a PC and tum on, without device configuration or user intervention D-SUB connection Transmits analog idea from your PC to the Monitor set. Connect the PC and the Monitor set with the supplied D-sub 15 pin signal cable as shown In the following Frustration.
PAGE 10
bas TO USING THE MONITOR SET A caution LL Emm « Connect the signal input cable and tighten i it by turning the screws 8 EB clockwise. le) Do not press the screen with your finger for a long time as this may result in temporary distortion on the screen. Avoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a screensaver if possible 1] NOTE When you want to use two PC in our Monitor, please connect the signal OBI-D) respectively in Monitor set.
PAGE 11
CUSTOMIZING SETTINGS TT CUSTOMIZING SETTINGS Press the desired button on the bottom of the Monitor set. 2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set. To return to the upper menu or set other menu items, use the up arrow {Bh} button. 3 Select EXIT fo leave the OSD menu. MENU 11.
PAGE 12
bas 12 CUSTOMIZING SETTINGS Customizing Settings Menu Settings to display the MENU O80 2 Setts options by pressing the € or por ¥ buttons. 3 Select the "TEXT MENU" button to enter the more option settings. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow (4) button Each option is explained below. 9 coven 1 Press MENU button on the bottom of the Monitor set B® aborigine im emery io NEG Agitators | Digital Description BRIGHTNESS . .
PAGE 13
CUSTOMIZING SETTINGS 13 PICTURE 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. Enter to PICTURE by pressing the ¥ bunion Set the options by pressing the buttons. . HEN > TEXTURE © A Svs ww 5 Select EXIT tw leave the OSD menu.
PAGE 14
bas T4 CUSTOMIZING SETTINGS COLOR 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. Elect COLOR by pressing the button. Enter to COLOR by pressing the ¥ button. Set the options by pressing the buttons. & Select EXIT to fave the OSD menu. To return to the upper menu or set other menu items, use the up arrow button. Each option is explained below. MENU > NEXT MENU > COLOR Description GAMMA Set your own gamma value.
PAGE 15
CUSTOMIZING SETTINGS 15 DISPLAY 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. Select DISPLAY by pressing the B button Enter to DISPLAY by pressing the ¥ button. Set the options by pressing the buttons. 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow {4 button. Each option is explained below.
PAGE 16
bas 16 CUSTOMIZING SETTINGS OTHERS 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. i © Power NORTON we 3 Select OTHERS by pressing the ® button Cm enter fo OTHERS by pressing the ¥ bunion 5 Set the options by pressing the buttons. Sh 6 Select EXIT to leave the OSD menu.
PAGE 17
CUSTOMIZING SETTINGS 17 SUPER ENERGY SAVING Setting i 1 Press J { SUPER ENERGY SAVING ) button on i Z the bottom of the Monitor set to display the SUPER Rh = ENERGY SAVING OSD. SDL SEG HOD EE 1 a Set the options by pressing the buttons. 4 Select EXIT to leave the OSD menu. 8 BERBER . EEE eee Each option is explained below. SUPER ENERGY SAVING Description ON Enables SUPER ENERGY SAVING you can save energy with this energy.
PAGE 18
CUSTOMIZING SETTINGS PICTURE MODE Setting Press MODE button on the bottom of the Monitor set to display the PICTURE MODE OSD. bas Set the options by pressing the buttons. Select EXIT to leave the OSD menu, a NS SY ach option is explained below. PICTURE MODE Description CUSTOM tis a mode that the user can adjust each element.
PAGE 19
TROUBLESHOOTING 19 TROUBLESHOT TING Check the following before calling for service, No image appears Is the power cord of the display connected? Check and see if the power cord is connected properly fo the power outlet. Is the parer indicator light on? Press the Power button. Is the power on and the power indicator Red? Adjust the brightness and the contrast.
PAGE 20
bas 20 TROUBLESHOOTING AA CAUTION + Check Control Pane! » Display » Settings and see if the frequency of the resolution were changed. If yes, readjust the video card to the recommend resolution. « If the recommended resolution (optimal resolution) is not selected. letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.
PAGE 21
specifications 21 SPECIFICATIONS E19428 Display Serene Type 47.0 em (18.5 inch) Flat Panel Active matrix-TFT Declared coating Visible diagonal size: 47.0 cm Pixel Pitch 0.3 mim x 0.3 mm {Pixel Pitch} Synge Input Horizontal Frequency | 30 kHz to 61 kHz (Automatic) Vertical Frequency 58Hz to 75Hz (D-SUB) Input Form Separate Sync Video input Signal Input 15 pin D-SUB Connector Input Form RGE Analog {0.
PAGE 22
bas 22 SPECIFICATIONS SPECIFICATIONS E20425 Display Screen Type 50.8 em {20 inch) Flat Panel Active matrix-TFT LCDANtGlare coating Visible diagonal! size: 50.8 om Pixel Pitch 0.278 mm x 0.276 mm {Pixel Pitch) Synge Input Horizontal Frequency | 30 kHz to 83 kHz {Automatic} Vertical Frequency 56Hz to 75Hz (D-SUB) Input Form Separate Sync. Video Input Signal Input 15 pin 0-SUB Connector Input Form RGB Analog (0.
PAGE 23
SPECIFICATIONS 23 SPECIFICATIONS E2042T Display Serene Type 50.8 em {20 inch) Flat Panel Active matrix-TFT Largehearted coating Visible diagonal size: 50.8 cm Pixel Pitch 0.276 mm x 0.278 mm (Pixel Pitch) Synge Input Horizontal Frequency | 30 kHz to 83 kHz (Automatic) Vertical Frequency 58Hz to 75Hz (D-SUB, DVD) Input Form Separate Sync. Digital Video input Signal Input 14 pin D-SUB Connector /DIV-D Connector (Digital) Input Form RGE Analog (0.
PAGE 24
bas 24 SPECIFICATIONS SPECIFICATIONS E22425 Display Screen Type 54.6 cm {21.8 inch) Flat Pane! Active matrix-TFT LCDANHGlare coating Visible diagonal size: 54.6 om Pixel Pitch 0.247 mm x 0.247 mm {Pixel Pitch) Synge Input Horizontal Frequency | 30 kHz to 83 kHz {Automatic} Vertical Frequency 56Hz to 75Hz (D-SUB) Input Form Separate Sync. Video Input Signal Input 15 pin 0-SUB Connector Input Form RGB Analog (0.
PAGE 25
specifications 25 SPECIFICATIONS E2242T Display Serene Type 54.8 em (21.5 inch) Flat Panel Active matrix-TFT Declared coating Visible diagonal size: 54.6 cm Pixel Pitch 0.247 mm x 0.247 mm (Pixel Pitch) Synge Input Horizontal Frequency | 30 kHz to 83 kHz (Automatic) Vertical Frequency 58Hz to 75Hz (D-SUB, DVD) Input Form Separate Sync. Digital Video input Signal Input 14 pin D-SUB Connector /DIV-D Connector (Digital) Input Form RGE Analog (0.
PAGE 26
bas 26 SPECIFICATIONS SPECIFICATIONS E23427 Display Screen Type 58.4 cm (23 inch) Flat Pane! Active matrix-FT LCOANHGlare coating Visible diagonal size: 58.4 cm Pixel Pitch 01.268 mm x 0.265 mun (Pixel Pitch) Synge input Horizontal Frequency | 30 kHz to 83 kHz (Automatic) Vertical Frequency 56Hz to 75Hz (D-SUB, DIV-0) input Form Separate Synge. Digital Video Input Signal Input 15 pin D-SUB Connector /OBI-D Connector (Digital) Input Form RGB Analog (0.
PAGE 27
specification 27 SPECIFICATIONS E2442T Display Bergen Type 60.9 om {24 inch) Flat Pane! Active matrix-FT Largehearted coating Visible diagonal size: 80.9 cm Pixel Pitch 0.277 mm x 0.277 mm (Pixel Pitch} Synge Input Horizontal Frequency | 30 kHz to 83 kHz (Automatic) Vertical Frequency 56Hz to 75Hz (D-SUB, DIV-D} Input Form Separate Sync. Digital Video Input Signal Input 15 pin D-SUB Connector /OBI-D Connector {Digital} Input Form RGB Analog (0.
PAGE 28
bas 28 SPECIFICATIONS Preset Modes (Resolution) E19428 Display Mores (Resolution Pe iin) oe vita) popularity) 720% 800 F468 70 7 840 x 480 31.489 60 fu B40 x 480 37.500 75 fe 500 800 37878 50 Pe 500 % 600 BE 75 Pe 432 x 624 49.728 75 fu i024 x 768 [EE BE) 7 1024 x 768 a0.123 75 +f 1366 x 768 47.712 8G +f Recommend Mode E2042S/E2042T Display Nodes (Resolution) He bi) ey] Polarity(HIV) T20 x 400 31.468 70 ft 540% 480 des 50 7 540% 450 7.500 75 7 400 x 600 37.
PAGE 29
SPECIFICATIONS 29 Preset Modes (Resolution) E22428/E2242T/E2342T/E2442T Display Odes (Resolution | Leonel 0 Yee Polarity( HA) 720 x 400 31.468 ko Bad B40 x 480 31.462 80 he 840 x 480 37.500 75 ie 800 % 600 37578 50 IT 800% 500 W575 75 iv 1024 788 48.363 6G 1024 1 788 80.023 75 155 x 864 57.500 75 1280 x 1024 53.981 50 1280 8 1024 79.978 7a 16880 x 1050 65.200 B80 i 1920 x 1080 67.
PAGE 30
PROPER POSTURE PROPER POSTURE Proper posture for using the Monitor set. bas Adjust the Monitor set and your posture to allow you 16 view images at the optimal viewing angle. Adjust the location of the Monitor set to avoid it reflecting light Place your hands gently on the keyboard, keeping your arms bent at the elbows and horizontally outright.
PAGE 31