Owner's Manual

7
ENG
ENGLISH
ASSEMBLING AND PREPARING
Mounting on a table
1
Lift and tilt the Monitor into its upright position
on a table.
Leave a 10 cm (minimum) space from the wall
for proper ventilation.
10 cm
10 cm
10 cm
10 cm
Disconnect the power cord first, and then move
or install the Monitor. Otherwise electric
shock may occur.
CAUTION
2
Connect the AC-DC Adapter and Power Cord
to a wall outlet.
When you adjust the angle, do not hold the
bottom of the Monitor frame as shown on
the following illustration, as it may injure your
fingers.
Do not touch or press the screen when
adjusting the angle of the monitor.
WARNING
DC-IN /
䏳㵎幑‣
DC-IN /
䏳㵎幑‣
DC-IN /
䏳㵎幑‣
DC-IN /
䏳㵎幑‣
or