User manual

HAPTER

| VoIP Traffic Configuration

Configuring VoIP Traffic

– 156 –

ES-2000 Series

COMMAND USAGE

All ports are set to VLAN access mode by default. Prior to enabling VoIP for

a port (by setting the VoIP mode to Auto or Manual as described below),

first set the VLAN membership mode to hybrid (see "Adding Static

Members to VLANs" on page 96).

PARAMETERS

These parameters are displayed:

◆ Auto Detection Status – Enables the automatic detection of VoIP

traffic on switch ports. (Default: Disabled)

◆ Voice VLAN – Sets the Voice VLAN ID for the network. Only one Voice

VLAN is supported and it must already be created on the switch.

(Range: 1-4093)

◆ Voice VLAN Aging Time – The time after which a port is removed

from the Voice VLAN when VoIP traffic is no longer received on the port.

(Range: 5-43200 minutes; Default: 1440 minutes)

OTE

The Voice VLAN ID cannot be modified when the global Auto

Detection Status is enabled.

WEB INTERFACE

To configure global settings for a Voice VLAN:

1. Click Traffic, VoIP.

2. Select Configure Global from the Step list.

3. Enable Auto Detection.

4. Specify the Voice VLAN ID.

5. Adjust the Voice VLAN Aging Time if required.

6. Click Apply.

Figure 85: Configuring a Voice VLAN