User manual

C HAPTER 14 | Security Measures
Configuring HTTPS
– 174 –
ES-2000 Series
When you have obtained these, place them on your TFTP server and
transfer them to the switch to replace the default (unrecognized) certificate
with an authorized one.
N OTE : The switch must be reset for the new certificate to be activated. To
reset the switch, see "Resetting the System" on page 63.
PARAMETERS
These parameters are displayed:
◆ TFTP Server IP Address
– IP address of TFTP server which contains
the certificate file.
◆ Certificate Source File Name
– Name of certificate file stored on the
TFTP server.
◆ Private Key Source File Name
– Name of private key file stored on
the TFTP server.
◆ Private Password
– Password stored in the private key file. This
password is used to verify authorization for certificate use, and is
verified when downloading the certificate to the switch.
◆ Confirm Password
–
Re-type the string entered in the previous field
to ensure no errors were made. The switch will not download the
certificate if these two fields do not match.
WEB INTERFACE
To replace the default secure-site certificate:
1. Click Security, HTTPS.
2. Select Copy Certificate from the Step list.
3. Fill in the TFTP server, certificate and private key file name, and private
password.
4. Click Apply.