User manual

HAPTER

| Security Measures

Access Control Lists

– 179 –

ES-2000 Series

WEB INTERFACE

To add rules to a Standard IP ACL:

1. Click Security, ACL.

2. Select Configure ACL from the Step list.

3. Select Add Rule from the Action list.

4. Select IP Standard from the Type list.

5. Select the name of an ACL from the Name list.

6. Specify the action (i.e., Permit or Deny).

7. Select the address type (Any, Host, or IP).

8. If you select “Host,” enter a specific address. If you select “IP,” enter a

subnet address and the mask for an address range.

9. Click Apply.

Figure 103: Configuring a Standard IPv4 ACL

CONFIGURING AN

EXTENDED IPV4 ACL

Use the Security > ACL (Configure ACL - Add Rule - IP Extended) page to

configure an Extended IPv4 ACL.

PARAMETERS

These parameters are displayed:

◆ Type – Selects the type of ACLs to show in the Name list.

◆ Name – Shows the names of ACLs matching the selected type.

◆ Action – An ACL can contain any combination of permit or deny rules.