User manual

HAPTER

| Security Measures

Configuring Port Security

– 188 –

ES-2000 Series

■

None: No action should be taken. (This is the default.)

■

Trap: Send an SNMP trap message.

■

Shutdown: Disable the port.

■

Trap and Shutdown: Send an SNMP trap message and disable the

port.

◆ Security Status – Enables or disables port security on the port.

(Default: Disabled)

◆ Max MAC Count – The maximum number of MAC addresses that can

be learned on a port. (Range: 0 - 1024, where 0 means disabled)

The maximum address count is effective when port security is enabled

or disabled, but can only be set when Security Status is disabled.

WEB INTERFACE

To set the maximum number of addresses which can be learned on a port:

1. Click Security, Port Security.

2. If port security is enabled on the selected port, first clear the check box

in Security Status column to disable security.

3. Set the maximum number of MAC addresses allowed on the port.

4. Click Apply.

Figure 109: Setting the Maximum Address Count for Port Security