User manual

C HAPTER 15 | Basic Administration Protocols
Link Layer Discovery Protocol
– 207 –
ES-2000 Series
time of a notification are included in the transmission. An SNMP agent
should therefore periodically check the value of
lldpStatsRemTableLastChangeTime to detect any lldpRemTablesChange
notification-events missed due to throttling or transmission loss.
◆ MED Fast Start Count – Configures the amount of LLDP MED Fast
Start LLDPDUs to transmit during the activation process of the LLDP-
MED Fast Start mechanism. (Range: 1-10 packets; Default: 4 packets)
The MED Fast Start Count parameter is part of the timer which ensures
that the LLDP-MED Fast Start mechanism is active for the port. LLDP-
MED Fast Start is critical to the timely startup of LLDP, and therefore
integral to the rapid availability of Emergency Call Service.
WEB INTERFACE
To configure LLDP timing attributes:
1. Click Administration, LLDP.
2. Select Configure Global from the Step list.
3. Enable LLDP, and modify any of the timing parameters as required.
4. Click Apply.
Figure 120: Configuring LLDP Timing Attributes