User manual

C HAPTER 15 | Basic Administration Protocols
Link Layer Discovery Protocol
– 215 –
ES-2000 Series
◆ System Capabilities Enabled – The primary function(s) of the
system which are currently enabled. Refer to the preceding table.
◆ Management Address – The management address protocol packet
includes the IPv4 address of the switch. If no management address is
available, the address should be the MAC address for the CPU or for the
port sending this advertisement.
Interface Settings
The attributes listed below apply to both port and trunk interface types.
When a trunk is listed, the descriptions apply to the first port of the trunk.
◆ Port/Trunk Description – A string that indicates the port or trunk
description. If RFC 2863 is implemented, the ifDescr object should be
used for this field.
◆ Port/Trunk ID – A string that contains the specific identifier for the
port or trunk from which this LLDPDU was transmitted.
WEB INTERFACE
To display LLDP information for the local device:
1. Click Administration, LLDP.
2. Select Show Local Device Information from the Step list.
3. Select General, Port, or Trunk.
Figure 124: Displaying Local Device Information for LLDP (General)
DOCSIS cable device IETF RFC 2669 and IETF RFC 2670
End Station Only IETF RFC 2011
Table 22: System Capabilities (Continued)
ID Basis Reference