User manual

C HAPTER 15 | Basic Administration Protocols
Power over Ethernet
– 225 –
ES-2000 Series
DISPLAYING THE
SWITCH’S OVERALL
POE POWER BUDGET
Use the Administration > PoE (Configure Global) page to display the
maximum PoE power budget for the switch (power available to all Fast
Ethernet ports). The maximum power budget is fixed at the maximum
available setting, which prevents overload conditions at the power source.
If the power demand from devices connected to the switch exceeds the
power budget, the switch uses port power priority settings to limit the
supplied power.
PARAMETERS
These parameters are displayed:
◆ PoE Maximum Available Power – The power budget for the switch.
If devices connected to the switch require more power than the switch
budget, the port power priority settings are used to control the supplied
power. (Fixed: 195 Watts)
◆ System Operation Status – Status of the PoE power service provided
to the switch ports.
◆ PoE Power Consumption – The amount of power being consumed by
PoE devices connected to the switch.
◆ Software Version – The version of software running on the PoE
controller subsystem in the switch.
WEB INTERFACE
To set the overall PoE power budget for switch:
1. Click Administration, PoE.
2. Select Configure Global from the Step list.
Figure 130: Showing the Switch’s PoE Budget