User manual

– 23 –
ES-2000 Series
1 INTRODUCTION
This switch provides a broad range of features for Layer 2 switching. It
includes a management agent that allows you to configure the features
listed in this manual. The default configuration can be used for most of the
features provided by this switch. However, there are many options that you
should configure to maximize the switch’s performance for your particular
network environment.
KEY FEATURES
Table 1: Key Features
Feature Description
Configuration Backup
and Restore
Using management station
Authentication Web – user name/password, RADIUS, TACACS+, HTTPS
SNMP v1/2c - Community strings
SNMP version 3 – MD5 or SHA password
Port – IEEE 802.1X, MAC address filtering
General Security
Measures
Port Authentication
Port Security
Access Control Lists Supports up to 512 rules, 64 ACLs,
and a maximum of 32 rules for an ACL
DHCP Client
Port Configuration Speed and duplex mode and flow control
Port Trunking Supports up to 12 trunks – static or dynamic trunking (LACP)
Port Mirroring 24 sessions, one or more source ports to one analysis port
Congestion Control Rate Limiting
Throttling for broadcast, multicast, unknown unicast storms
Random Early Detection
Address Table 8K MAC addresses in the forwarding table, 1K static MAC
addresses, 256 L2 multicast groups
IP Version 4 Supports IPv4 addressing, and management
IEEE 802.1D Bridge Supports dynamic data switching and addresses learning
Store-and-Forward
Switching
Supported to ensure wire-speed switching while eliminating bad
frames
Spanning Tree Algorithm Supports standard STP and Rapid Spanning Tree Protocol (RSTP)
Virtual LANs Up to 128 using IEEE 802.1Q, port-based
Traffic Prioritization Default port priority, traffic class map, queue scheduling, IP
Precedence, or Differentiated Services Code Point (DSCP)
Qualify of Service Supports Differentiated Services (DiffServ)