User manual

C HAPTER 15 | Basic Administration Protocols
Simple Network Management Protocol
– 237 –
ES-2000 Series
SNMPv2 Traps
coldStart 1.3.6.1.6.3.1.1.5.1 A coldStart trap signifies that the
SNMPv2 entity, acting in an agent role,
is reinitializing itself and that its
configuration may have been altered.
warmStart 1.3.6.1.6.3.1.1.5.2 A warmStart trap signifies that the
SNMPv2 entity, acting in an agent role,
is reinitializing itself such that its
configuration is unaltered.
linkDown
*
1.3.6.1.6.3.1.1.5.3 A linkDown trap signifies that the
SNMP entity, acting in an agent role,
has detected that the ifOperStatus
object for one of its communication
links is about to enter the down state
from some other state (but not from
the notPresent state). This other state
is indicated by the included value of
ifOperStatus.
linkUp* 1.3.6.1.6.3.1.1.5.4 A linkUp trap signifies that the SNMP
entity, acting in an agent role, has
detected that the ifOperStatus object
for one of its communication links left
the down state and transitioned into
some other state (but not into the
notPresent state). This other state is
indicated by the included value of
ifOperStatus.
authenticationFailure* 1.3.6.1.6.3.1.1.5.5 An authenticationFailure trap signifies
that the SNMPv2 entity, acting in an
agent role, has received a protocol
message that is not properly
authenticated. While all
implementations of the SNMPv2 must
be capable of generating this trap, the
snmpEnableAuthenTraps object
indicates whether this trap will be
generated.
RMON Events (V2)
risingAlarm 1.3.6.1.2.1.16.0.1 The SNMP trap that is generated when
an alarm entry crosses its rising
threshold and generates an event that
is configured for sending SNMP traps.
fallingAlarm 1.3.6.1.2.1.16.0.2 The SNMP trap that is generated when
an alarm entry crosses its falling
threshold and generates an event that
is configured for sending SNMP traps.
Private Traps
swPowerStatus ChangeTrap 1.3.6.1.4.1.572.17389.12000.2.1.0.1 This trap is sent when the power state
changes.
swPortSecurityTrap 1.3.6.1.4.1.572.17389.12000.2.1.0.36 This trap is sent when the port is being
intruded. This trap will only be sent
when the portSecActionTrap is
enabled.
swIpFilterRejectTrap 1.3.6.1.4.1.572.17389.12000.2.1.0.40 This trap is sent when an incorrect IP
address is rejected by the IP Filter.
swAuthenticationFailure 1.3.6.1.4.1.572.17389.12000.2.1.0.66 This trap will be triggered if
authentication fails.
swAuthenticationSuccess 1.3.6.1.4.1.572.17389.12000.2.1.0.67 This trap will be triggered if
authentication is successful.
Table 26: Supported Notification Messages (Continued)
Model Level Group