User manual
C
HAPTER
16
| IP Configuration
Address Resolution Protocol
– 270 –
ES-2000 Series
WEB INTERFACE
To configure the timeout for the ARP cache or to enable Proxy ARP for a
VLAN (i.e., IP subnetwork):
1. Click IP, ARP.
2. Select Configure General from the Step List.
3. Set the timeout to a suitable value for the ARP cache.
4. Click Apply.
Figure 168: Setting the ARP Timeout
DISPLAYING ARP
ENTRIES
Use the IP > ARP (Show Information) page to display dynamic or local
entries in the ARP cache
.
The ARP cache contains entries for local interfaces,
including subnet, host, and broadcast addresses. However, most entries will
be dynamically learned through replies to broadcast
messages.
WEB INTERFACE
To display entries in the ARP cache:
1. Click IP, ARP.
2. Select Show Information from the Step List.
Figure 169: Displaying ARP Entries