User manual

C HAPTER 3 | Using the Web Interface
Navigating the Web Browser Interface
– 36 –
ES-2000 Series
N OTE : This manual covers the ES-2026 and ES-2026P Fast Ethernet
switches, and the ES-2024G and ES-2024GP Gigabit Ethernet switches.
Other than the difference in port types supported by the Fast Ethernet and
Gigabit Ethernet switches, and support for PoE (ES-2026P, ES-2024GP),
there are no other significant differences. Therefore nearly all of the screen
display examples are based on the ES-2026. The panel graphics for all of
switch types are shown on the following page.
CONFIGURATION
OPTIONS
Configurable parameters have a dialog box or a drop-down list. Once a
configuration change has been made on a page, be sure to click on the
Apply button to confirm the new setting. The following table summarizes
the web page configuration buttons.
N OTE : To ensure proper screen refresh, be sure that Internet Explorer 5.x
is configured as follows: Under the menu “Tools / Internet Options /
General / Temporary Internet Files / Settings,” the setting for item “Check
for newer versions of stored pages” should be “Every visit to the page.”
N OTE : When using Internet Explorer 5.0, you may have to manually refresh
the screen after making configuration changes by pressing the browser’s
refresh button.
Table 3: Web Page Configuration Buttons
Button Action
Apply Sets specified values to the system.
Revert Cancels specified values and restores current
values prior to pressing “Apply.”
Save current configuration settings.
Displays help for the selected page.
Refreshes the current page.
Displays the site map.
Logs out of the management interface.
Links to the manufacture’s web site.
Sends mail to the manufacturer.