User manual

C HAPTER 3 | Using the Web Interface
Navigating the Web Browser Interface
– 40 –
ES-2000 Series
Trun k
Static 78
Configure Trunk Creates a trunk, specifying port members 78
Configure General 78
Show Information Displays trunk connection settings 78
Configure Configures trunk connection settings 78
Dynamic 80
Configure Aggregator Configures administration key for specific LACP groups 80
Configure Aggregation Port 78
Configure 78
General Allows ports to dynamically join trunks 80
Actor Configures parameters for link aggregation group members on the
local side
80
Partner Configures parameters for link aggregation group members on the
remote side
80
Show Information
Counters Displays statistics for LACP protocol messages 85
Internal Displays configuration settings and operational state for the local
side of a link aggregation
87
Neighbors Displays configuration settings and operational state for the
remote side of a link aggregation
88
Configure Trunk 80
Show Displays trunk connection settings 80
Configure Configures trunk connection settings 80
Show Member Show port members of dynamic trunks 80
Mirror 89
Add Sets the source trunks and target port for mirroring 89
Show Shows the configured mirror sessions 89
Statistics Shows Interface, Etherlike, and RMON port statistics 71
Chart Shows Interface, Etherlike, and RMON port statistics 71
Green Ethernet Adjusts the power provided to ports based on the length
of the cable used to connect to other devices
91
VLAN Virtual LAN 93
Static
Configure VLAN Configures VLAN groups, administrative status, and remote type 95
Modify VLAN and Member Ports Configures group name, status, and member attributes 96
Edit Member by Interface Specifies VLAN attributes per interface 96
Edit Member by Interface Range Specifies VLAN attributes per interface range 96
Table 4: Switch Main Menu (Continued)
Menu Description Page