User manual

C HAPTER 3 | Using the Web Interface
Navigating the Web Browser Interface
– 41 –
ES-2000 Series
MAC Address 101
Static 101
Add Configures static entries in the address table 101
Show Displays static entries in the address table 101
Dynamic
Configure Aging Sets timeout for dynamically learned entries 103
Show Dynamic MAC Displays dynamic entries in the address table 104
Clear Dynamic MAC Removes any learned entries from the forwarding database and
clears the transmit and receive counts for any static or system
configured entries
105
Spanning Tree 107
STA Spanning Tree Algorithm
Configure Global
Configure Configures global bridge settings for STP and RSTP 108
Show Information Displays STA values used for the bridge 112
Configure Interface
Configure Configures interface settings for STA 113
Show Information Displays interface settings for STA 116
Traffic
Rate Limit Sets the input and output rate limits for a port 119
Storm Control Sets the broadcast storm threshold for each interface 123
Priority
Default Priority Sets the default priority for each port or trunk 125
Queue Sets queue mode for the switch; sets the service weight for each
queue that will use a weighted or hybrid mode
126
Trust Mode Selects IP Precedence, DSCP or CoS priority processing 132
DSCP to DSCP 133
Add Maps DSCP values in incoming packets to per-hop behavior and
drop precedence values for internal priority processing
133
Show Shows the DSCP to DSCP mapping list 133
CoS to DSCP 136
Add Maps CoS/CFI values in incoming packets to per-hop behavior and
drop precedence values for priority processing
136
Show Shows the CoS to DSCP mapping list 136
PHB to Queue 129
Add Maps internal per-hop behavior values to hardware queues 129
Show Shows the PHB to Queue mapping list 129
Table 4: Switch Main Menu (Continued)
Menu Description Page