User manual

A BOUT T HIS G UIDE
– 5 –
ES-2000 Series
◆ Updated the Parameter list in "Configuring LLDP Interface Attributes"
on page 208.
◆ Added the section "Configuring LLDP Interface Civic-Address" on
page 211.
◆ Updated the Parameter list in "Displaying LLDP Remote Port
Information" on page 216.
◆ Updated Table 26, "Supported Notification Messages," on page 236.
◆ Updated information in "Setting the Switch’s IP Address (IP Version 4)"
on page 271.
◆ Updated the Parameter list in "Configuring IGMP Snooping and Query
Parameters" on page 277.
◆ Updated the Parameter list in "Setting IGMP Snooping Status per
Interface" on page 284.
◆ Added "Filtering and Throttling IGMP Groups" on page 290.
JULY 2010 REVISION
This is the third version of this guide. This guide is valid for software
release v1.1.2.0. It includes information on the following changes:
◆ Updated corporate logo on cover pages, and on the switch image used
in the management interface.
MAY 2010 REVISION
This is the second version of this guide. This guide is valid for software
release v1.0.1.5. It includes information on the following changes to the
web pages:
◆ Removed MAC Address > Learning Status page from the web interface.
◆ Added information on how to configure connection parameters for a
dynamic trunk (see "Configuring a Dynamic Trunk" on page 80).
◆ Added description of “Admin Edge Status for all ports” in the STA
interface configuration page (see "Configuring Interface Settings for
STA" on page 113).
◆ Changed HTTP and HTTPS to function as mutually exclusive services
(see "Configuring Global Settings for HTTPS" on page 172).
◆ Added information on how log messages are flushed from system
memory or flash memory during cold or warm restart (see "Configuring
Event Logging" on page 201).
◆ Added information on how to display log messages in system memory
or flash memory using the web interface (see "Configuring Event
Logging" on page 201).