User manual

C HAPTER 4 | Basic Management Tasks
Managing System Files
– 53 –
ES-2000 Series
■
HTTP Download – Copies a file from the switch to a management
station
◆ File Type – Specify Operation Code, Config File, or Loader.
◆ File Name –
The file name should not contain slashes (\ or /), the
leading letter of the file name should not be a period (.), and the
maximum length for file names is 31 characters for files on the switch.
(Valid characters: A-Z, a-z, 0-9, “.”, “-”, “_”)
N OTE : Only one copy of the system software (i.e., the runtime firmware)
can be stored in the file directory on the switch.
N OTE : The maximum number of user-defined configuration files is limited
only by available flash memory space.
N OTE : The file “ Factory_Default_Config.cfg ” can be copied to a
management station, but cannot be used as the destination file name on
the switch.
WEB INTERFACE
To copy firmware files:
1. Click System, then File.
2. Select Copy from the Action list.
3. Select HTTP Upgrade as the file transfer method.
4. Set the file type to Operation Code, Config File, or Loader.
5. Enter the name of the file to download.
6. Select a file on the switch to overwrite or specify a new file name.
7. Then click Apply.