User manual
C
HAPTER
4
| Basic Management Tasks
Resetting the System
– 63 –
ES-2000 Series
WEB INTERFACE
To display memory utilization:
1. Click System, then Memory Status.
Figure 17: Displaying Memory Utilization
RESETTING THE SYSTEM
Use the System > Reset menu to restart the switch immediately.
COMMAND USAGE
◆ This command resets the entire system.
◆ To retain all configuration information stored in non-volatile memory,
click the Save button prior to resetting the system.
◆ When the system is restarted, it will always run the Power-On Self-Test.
PARAMETERS
The following parameters are displayed:
◆ Reset – Restarts the switch immediately.
◆ Save – Click this button to save the current configuration settings.
◆ Factory Default Settings & Reboot – Click this button to restore the
factory default settings and reboot the system.