User manual

C HAPTER 5 | Interface Configuration
Trunk Configuration
– 90 –
ES-2000 Series
COMMAND USAGE
◆ Traffic can be mirrored from one or more source trunks to a destination
port on the same switch.
◆ Monitor port speed should match or exceed source trunk speed,
otherwise traffic may be dropped from the monitor port.
PARAMETERS
These parameters are displayed:
◆ Source Trunk – The trunk whose traffic will be monitored.
(Range: 1-12)
◆ Target Port – The port that will mirror the traffic on the source trunk.
(ES-2026/P: 1-26, ES-2024G/P: 1-24)
◆ Type – Allows you to select which traffic to mirror to the target port, Rx
(receive), Tx (transmit), or Both. (Default: Rx)
WEB INTERFACE
To configure a local mirror session:
1. Click Interface, Trunk, Mirror.
2. Select Add from the Action List.
3. Specify the source trunk.
4. Specify the monitor port.
5. Specify the traffic type to be mirrored.
6. Click Apply.
Figure 43: Configuring Trunk Mirroring