Video Cassette with Line Player Recording OWNER'S MANUAL MODEL : EV193W PAL NTSC Before connecting, operating, please read this instruction booklet or adjusting this product, carefully and completely.
Position your VCP so that no bright sunlight falls directly onto it. F e a t u r e s CPrecautions, ontes& During electrical storms it is advisable to LG Service Character and based on that means cus- tomer 's I impression. should like to help you to get to know your new video player. 3 to a TV 4 Video Channel 5 Connecting Tuning in a On Screen 7 Do not Playing operate your VCP if it is damaged. Your VCP should not be qualified Never service remove repaired by personnel.
Each button function your VCP has the same its corresponding button on on as the remote control. (see page 6.) 12 456 3 POWER STOP OPR SYSTEM POWER 12 1. Power 2. 3. FF REW EJECT 11 (ON/OFF) Stop Tape Eject Cassette Compartment & CST.IN PLAY REC LP/EP STANDBY 10 9 8 7 7. Pause/Still 8. Record 9. Remote Control Sensor 4. Rewind 10. Function Indicators 5. 11. Play 6. Fast Forward YourVCP'sntl System Select (see (see page 9.) page 7.) 12.
The guidance given on this page is the most common form of connection. However please check with your manufacturer's instruction books for specific information. Make sure all connections are made with both your ToaTV Conecting VCP and additional appliance unplugged from the mains to avoid damaging your equipment. Connecting using Audio/Video cable is one of the best ways to achieve optimum sound and picture quality from video-tape playback (Recommended).
Your TV receives signals You have to select a from the video player (VCP) channel number like another TV station. your TV and tune it in so that you may watch video TV set equipped with AUDIO and VIDEO sockets this on If you connect a monitor or a will not be necessary, simply select the AV mode 1 Make 2 that you have installed your described earlier in sure Insert a video pre-recorded tape into your VCP and VCP press PLAY. this book.
Your video player (VCP) is designed so that almost all of its features CONTROL HANDSET. Some features The maximum must also be video RemotCnrl Locatin&Fu operating distance that you may control within an angle of 30 degrees either side standby or on on Eject POWER EJEC MANUAL TRACKING To If you do not intend to use the REMOTE MENU SPEED SOP PLAY screen.
On Screen Display gives functions of this video Screen Display you information about the tape counter and operational mode of your VCP. Some player can be set and altered on the TV screen using the remote control with On MENU OSD FUNCTION OSD Press MENU / i to Switches the function OSD ON the main menu. Press F desired display or G to select the menu. Press DISPLAY / OK and press F or G to select the sub menu. Press MENU / i to the remove improve SYSTEM Dr. OSD display 9).
This VCP is How to designed play back only be to colour systems. You will mains. playbcktpe Getting When a better and record cassettes using PAL, MESECAM, able to load and video cassettes when your VCP is eject and NTSC (3.58 or 4.43) plugged into the picture playback started, the automatic tracking function works to get the best possible picture automatically. "AUTO TRACKING" will appear on the TV screen while it is doing this.
Video Head Cleaning Dirt accumulating on the head after a long period of time can cause the playback picture to become blurred or broken up. High quality video cassette tapes will not normally deposit dirt onto the video head, but old or damaged tapes might. Clean the video heads with a commercially available video heads cleaning tape. 4 5 STILL Press P/STILL to still picture. S Press either FF a REW SOP REC REW or back.
Other PlaybckFeturs 1 2 Press F Repeat playback If you want to play back tape repeatedly, set 3 a G to select or REPEAT. REPEAT to ON. Press DISPLAY / OK. Press MENU / i. Press F ON G to switch or automatically rewinds tape to the beginning and repeats playback continuously. Logic search Hold down FF to watch a during Press MENU / i to from TV remove screen. RK rewind.
VIDEO DOCTOR (Self-Diagnosis) Automatic This feature informs you that there is a problem with your VCP. These error messages will appear on the TV Press MENU / i. Press F or Power Shut-Off tape rewind has been completed. screen. 2 1 Memory This feature of your VCP enables you to switch off your VCP automatically after 2 1 PressForGtochecka Press POWER problem. tape rewind. G to select Dr. during POWER indicator flashes in the display window on the front of your VCP.
Your VCP is vehicle DCPowerSuc designed for 12V (1.2A) or a in-home or DC power use. You can power it from the Input Socket Plug DC power cord into either the 12-volt DC outlet cigarette lighter socket. Plug the other end into the DC input socket on your VIDEO AERIAL IN designed negative ground electrical systems. (This is standard for vehicles.) If your vehicle has a different type of electrical system, the DC power system cannot be used. VCP.
Your VCP allows you to make 1 recordings connecting 2 Connect your VCP to as shown below. a TV Press POWER to turn to a TV equipped with AUDIO and VIDEO sockets. 3 on your VCP. Insert record How to 4 a video cassette with the record protection tab Set the desired recording speed by pressing SPEED. into your VCP. Your external aerial must be plugged in your TV. Aerial TV set your TV and select the channel you wish to Turn on record with the TV's channel selector.
6 5 Press REC to start 7 Press P/STILL to avoid recording unwanted recording. scenes. During recording of TV programme you do not change the TV channel number your TV. on Press STOP to end recording. SPEED REC indicator flashes in the display window. RK SILL Press P/STILL continue again recording. Tapes be 5 can minutes; to SOP REW REC PLAY for up to paused Press EJECT. The will be displayed when a tape is paused.
Make sure all connections damaging your are made with both your VCP's and Television 1 2 Connect your VCP to another VCP as shown TV set Press POWER to turn on Insert a blank video your VCP. tape with the record Insert protection tab into (recording) VCP. a source Aerial pre-recorded AERIAL Press STOP / EJECT to stop recording. Tapes Dub ing your tape into another (playing) VCP.
Check the No ? STroubleshting& pecifatons ? ? ? following & picture no Is the mains before calling for service. Power ..................................AC 110-240V, 50/60Hz +3 DC 12 -0 V, 1.2A sound plug plugged Is the TV switched on in and switched ? on Power ? Have you tuned in a video channel on your TV to watch video tapes on ? (see page 5.
P/N: 3834RP0084E