Owner's Manual

10
BEFORE OPERATING
Volume
Adjustment
Turn VOLUME clockwise to increase the sound
level,
or counterclockwise to decrease
it.
If
you
turn the volume
up
more than the maximum
level,
the volume level flashes
in
the
display.
(Or press
VOLUME or button on the remote
control.)
Sound
Quality
Adjustment
MDSS
(Multi Dynamic
Sound
System)
Press the MDSS button to reinforce treble
(Hi-Tone),
bass
(UBB
:
Ultra Bass
Booster),
and surround effect.
The MDSS indicator
lights up.
To cancel
it
press
the MDSS button
again.
To activate stereo sound
You can choose between
4
fixed sound modes
:
select a desired sound mode
by using
the
EQ
PATTERN
button.
Press the
EQ
PATTERN
button once to see the
current sound mode scrolled on the
display.
Press the
EQ
PATTERN
button
repeatedly,
until the
desired sound mode is scrolled on the
display.
FLAT :
linear
frequency response
ROCK
:
more
bass,
more treble
POP
:
less
bass,
less treble
CLASSIC
:
for orchestral music
For
personal listening
Connect
headphone
to
headphone
socket.
No sound comes from the
speakers.
MUTE
button(on
remote
control)
Press this button to mute
your
unit.
You can mute
your
unit
in
order,
for
example,
to
answer the
telephone.
The indicator
appears
on the
display.
MODE/RIF(Radio
Interference
Filter)
button
To switch from mono to stereo
reception
and vice
versa.
If
the
power
of transmission is too weak to
receive stereo
FM
without
interference,
switch the
STEREO off.
When a
MW(AM),
or
LW
broadcasting
is
being
recorded,
the
R.I.F.(BEAT-SWITCH)
button can be
used to reduce unwanted "beat"
signals
and
noise,
which were not heard before
recording.
Dimmer function
This function
will
be darken the
display by
half
in
power-on
status,
if
you press
the
DIMMER
button
once,
only
the
display
will
be
darken,
and
if
you
press
it
once
again
the LEDs of the FUNCTION
SELECT button
will
go
out. To cancel
it
press
the
button
again.