Owner's Manual

Preparations
Setting
the color
system
This
player
conforms to the NTSC and PAL
color
systems.
Press PAL/NTSC on the
remote to the
appropriate position, according
to
your
TV.
?
If the color
system
of
your
TV is NTSC:
Press PAL/NTSC on the remote to select
NTSC. "NTSC"
appears
in the front
panel
display.
Pictures will not be
displayed
if
you
set the PAL. When
you play
a VIDEO CD
based on PAL
system,
the
picture
will be
stretched
vertically
and will be
displayed
with the lower
part
of the
picture
cut off.
?
If the color
system
of
your
TV is PAL:
Press PAL/NTSC on the remote to select
PAL. "PAL"
appears
in the front
panel
display.
Pictures will not be
displayed
if
you
set the NTSC. When
you play
a VIDEO CD
based on NTSC
system,
the
picture
will be
stretched
horizontally
and will be
displayed
with the
upper
and lower
parts
of the
screen masked in black.
Additional information for remote
Connecting
the AC
power
cord
Connect the AC
power
cord to a wall outlet.
Transporting
the
player
Before
transporting
the
player,
follow the
procedure
below to return the internal mech-
anisms to their
original position.
1. Remove the disc from the disc
tray.
2. Press OPEN/CLOSE to close the dis
tray.
"no dISC"
appears
in the
display.
3. Wait for 10
seconds,
then
press
POWER
to turn off the
player.
4. Disconnect the AC
power
cord from a wall
outlet.
5. Put the
player
in the
original
carton and
transport
the
player.
Inserting
Batteries into the Remote
You can control the
player using
the
supplied
remote. Insert two R03
(size AAA)
batteries
by matching
the
3
and
#
ends on
the batteries to the
markings
inside the
compartment.
When
using
the
remote,
point
it at the remote sensor on the
player.
6
PAL/NTSC
These buttons are not available.