Owner's Manual

Connections

Auxiliary Function

Connect an auxiliary device such as a TV or VCR via the rear mounted AUX connector and press

FUNCTION [Refer to the example image(1) shown below].

When you connect each end of the bundled portable in cable with both the AUX connector and the

headphone jack of a portable device (like MP3 player, cassette tape player, CD player, etc.), you can

hear the sound of the device through the speakers [Refer to the example image(2) shown below].

Note:

Turn the unit off and then connect an auxiliary device before you connect an auxiliary device.

Because it may make a noise.

Speaker System Connection

Connect the speaker cables to the speaker terminal.

Notes:

• Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to –.

If the cords are reversed, the sound will be distorted and will lack base.

• Connect the Left/Right speaker correctly. If it reversed, the sound may be distorted.

Front

speaker (L)

Front

speaker (R)

Auxiliary Device

Portable Device

To AUDIO out

Portable in cable

To AUDIO in

Example (1) Example (2)