Owner's Manual

6
REMOTE CONTROL
SYSTEM CONNECTIONS
Connection to
Auxiliary
Sources
VIDEO OUT
jack
connection
From the VIDEO OUT
jack
on the back of
theunittoaVIDEOINjackofaTVor
Monitor connect.
AUX
jacks
connections
Two
phono
sockets marked AUX are
provided
on the back of the unit for
connecting
other units
(for example,
a
record
player
with a
pre amplifier,
video
recorders or
tape recorders).
NOTE:
?You can
enjoy
a
song
while
listening
to the
accompaniment
of selected
song through your
unit and
watching
the videos on TV.
?Press "TV/VIDEO
Selection"
button on TV to select
video
signal (Video)
Connection the Main
Speakers
Insert the red wire of the
right/left
hand
speaker
into the
red terminal
marked(+)
at the back of the unit.
Insert the black wire into the black terminal
marked(-).
This
speaker system
is
designed
for
magnetic
shielded.
But the video
image
of a
nearby
television
may
be
distorted.
In this
case,
put away
the affected television about
10~20cm from the
speaker system.
Control
Range
The remote control device is
designed
for the
range
shown in the illustration.
NOTE
Strong light
or obstacles between the remote control
device and the stereo
system may
interfere with the
functioning
of the remote control.
Notes on Batteries
Your remote control comes with batteries.
Use two
"AAA(UM-4.
IEC
R03)" type high quality
batteries.
When the remote control fails to
operate accurately
at maximum distance from the unit.
Replace
the
worn out batteries with new ones.
Install two "AAA"
type
batteries,
observing
correct
battery polarity(
and
).
Reversed
battery
polarity might damage
the unit.
Do not use different
types
of batteries
together,
or
an old one with new one.
When
you
are not
going
to use the unit for a
long
time,
remove the batteries to
prevent possible
electrolyte leakage.
Approx.7m
Open
rear cover. Install the batteries
according
to
their
polarity(
,
)
and close
the cover.