English Spanish MINI HI-FI AUDIO SYSTEM OWNER'S MANUAL MODELS : FFH-262A/L/S/AX/AD FE-262E FFH-363A/L/S/AX/AD FE-363E Please read this manual carefully before operating your unit. Retain it for future reference. Designs without and specifications are subject notice for improvement.
MISE EN GARDE CAUTION Cet appareil num rique de la classe B respecte toutes glement sur le mat riel brouilleur de Canada. les exigences de R AVERTISSEMENT CAUTION: TO REDUCE THE RISK OF RISQUE DE CHOC ELECTRIQUENE-PAS OUVRIR ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK). NO USER SERVICEABLE PARTS INSIDE.
Antenna Lead-in Wire Ground Clamp Antenna Discharge Unit (NEC Section 810-20) Electric Service Grounding Conductors (NEC Section 810-21) Equipment Ground Clamps Power Service Electrode (NEC ? Outdoor Antenna cable system antenna some static ? or Grounding - If cable outside antenna an is connected to the product, system is grounded protection against voltage charges. be so as sure power-supply cord or plug is damaged. liquid spilled, or objects have fallen into the product.
IMPORTANT SAFETY INSTRUCTIONS FOR CUSTOMERS IN THE UNITED STATES ? CAUTION: ? Read all of these instructions. ? Save these instructions for later ? Follow all the audio ? warnings and equipment. Read instructions - use. instructions maked on All the and safety - The safety and operating product is ? operating reference. Heed in the ? Warnings operatiog All - warnings the on product and instructions should be followed.
OPERATING ELEMENTS FRONT VIEW BACK VIEW OPTION 31 30 12 3 29 5 6 8 10 11 4 28 26 7 24 27 25 9 23 12 22 13 21 14 15 20 16 17 18 19 FRONT VIEW 20. TAPE DECK 2 EJECT POSITION 21. DISC DIRECT PLAY buttons 1. RECORD / RECORD PAUSE 2. REMOTE SENSOR 3. MDSS indicator 4. MEMORY / PROGRAM button 5. DIMMER button 6. button( REC/ ( PUSH EJECT) (DISC1, DISC2, DISC3) ) 22. TAPE / STOP, CD STOP / CLEAR button( 23.
FUNCTION DISPLAY 12 3 4 5 6 7 8 17 16 15 14 13 12 11 10 9 1. LEVEL indicator 9. 2. CD REPEAT indicator 10. DISC entered indicator DISC NO. indicator 3. FUNCTION, VOLUME LEVEL, CLOCK, 11. FREQUENCY, TAPE COUNTER, CD PLAYING 12. AUTO TUNE RECEIVING indicator R.I.F. indicator TIME, MDSS, EQ PATTERN display 13. MUTE indicator 4. LEVEL indicator 14. TAPE DIRECTION indicator 5. FM STEREO RECEIVING indicator 15. PLAY MODE indicator 6. FM MONO indicator 7. RDS indicator 8.
REMOTE CONTROL Control Range The remote control device is designed for the range shown in the illustration. NOTE Strong light obstacles between the remote control or device and the stereo Approx.7m system may interfere with the of the remote control. functioning Notes on Batteries Your remote control Use two with batteries. comes "AAA(UM-4. IEC R03)" type high quality batteries.
CONNECTIONS Antenna(aerial) Connection For the models for other countries For the European and U.K. model figure (1), (3). figure (2), (4).
CLOCK SETTING Example 1. : Set to 9:25 in the Press the CLOCK button. (If morning the clock is than 1.5 - seconds) begin The hours 5. already set, press and hold the CLOCK button for Press the CDII/SET/COUNTER RESET button. more to blink. CDII/SET COUNTER CLOCK 2. Select a pressing 24 hour cycle or 12 hour 6. cycle by Set the minutes with PRESET DOWN/UP button. the PRESET DOWN/UP button.
BEFORE OPERATING Volume MODE/RIF (Radio Interference Adjustment Turn VOLUME clockwise to increase the sound level, or counterclockwise to decrease it. If you turn the volume up more To switch from than the maximum press VOLUME (Or commander.) button or on to stereo reception button and vice If the power of transmission is too weak to versa. level, the volume level flashes in the display. mono Filter) receive stereo FM without interference, switch the the remote STEREO off.
RADIO RECEPTION Tuning in 1. Turn the power. on 4. To recall Automatically 2. Turn the FUNCTION SELECTOR until the desired until repeatedly 3. Press and hold the A. TUNING DOWN/UP button for ) unit tunes in a station more preset number appears or press it repeatedly. the desired band appears. or presets. Press and hold the PRESET DOWN / UP button ( RDS (Radio (OPTIONAL) than 0.5 second. The automatically. Data System) Reception What is RDS? Tuning in 1. Turn the power.
CD PLAYING To play Press one disc buttons to start To only of the DISC DIRECT one PLAY(DISC 1,2,3) play. discs remove Press the CD OPEN/CLOSE button to open the disc compartment. You can remove two discs. To remove the disc Number 1 disc Basic Number 2 disc Operation 1. Select the CD FUNCTION by turning Two discs 2. Press the CD OPEN/CLOSE button to open the disc compartment. disc is 3. Load disc play. one or on trays Playing three discs placing two discs, The disc an 3.
CD PLAYING to the Skipping of Beginning Programmed Play a Track The You can locate the To return the to of any track beginning of beginning the player has a memory function that allows play of up to 20 tracks over three discs in any order. 1. Press the PROG. / MEMO. button in the stop disc. on a current mode. or 2. Press track previous Press the button once to return to the beginning 3.
AUXILIARY FUNCTION 1. Switch the on device i.e. TV auxiliary connected to the rear mounted AUX or NOTE: VCR, (PHONO) sockets. You can see RECORDING section. also record from the auxiliary input source, 2. Press the "AUX" function button. TAPE PLAYBACK Playback Preparation You All sides can use normal only : tapes. Unit and 1. To set the cassette function: Switch the unit necessary press the button other deck.
RECORDING Recording from CD, Radio Equipment Connected a CD or The CD Wind up the Use only can synchro recording function dubs a complete programmed titles automatically into a CD and Preparation You Synchro Recording to the tape normal tapes. record from cassette deck 2 1. To select the function Switch the unit cassette. starts. point recording on 1. Select the CD function. only. 2.
RECORDING from Recording (Dubbing) Tape to Tape 3. To Preparation Wind up the Use tape to the point recording of the Press NORMAL DUBBING for normal and HIGH 1 DUBBING for double The 1. Select the TAPE function. NOTES speed dubbing. automatically. starts up dubbing : The pause function does not 2. To insert cassettes beginning tape. normal only tapes.
TIMER (8) the time to switch off in the Program same as the time to turn way Set the volume level (9) 3. When the TAPE is selected for cassette decks have cassette on. by pressing the cassette PRESET DOWN/UP button. case of power-on operated only the timer by if both tapes in; the 2 will be selected first. 4. The timer-off function will be Press the CDII/SET/COUNTER RESET (10) tape in deck playback, in the on.
SPECIFICATIONS MODEL SECTION FFH FFH 262 - - 363 AMP Output Power Frequency Response Signal-to-Noise Ratio 10W+10W (4Ω, 2ch, T.H.D 10%) 30W+30W (6Ω, 2ch, 42~25,000Hz 42~25,000Hz 83 dB 83 dB T.H.D 10%) TUNER FM 87.5~108MHz Tuning Range(optional) or 65~74MHz & 87.5~108MHz Intermediate Frequency Signal-to-Noise Ratio (Mono/Stereo, 98MHz) Frequency Response 87.5~108MHz or 65~74MHz & 87.5~108MHz 10.7 MHz 10.
