Owner's Manual

12
CD PLAYING
Basic
Operation
1.
Select the
CD FUNCTION
by turning
the
FUNCTION SELECTOR.
2. Press
the
CD OPEN/CLOSE
button to
open
the
disc
compartment.
3. Load disc
(s)
with the
label side
up.
Playing
one or
two
discs
Place discs on
trays
1 and 2.
Playing
three
discs
After
placing
two
discs,
press
the DISC SKIP
button to rotate the
trays.
Place the next disc
on
tray
3.
NOTICE
To load an
8cm(3 in.)
disc,
put
it onto the inner
circle of the
tray.
4. Press
the
CD OPEN/CLOSE
button to
close
the
disc
compartment.
5. Press
the
PLAY
( ) (or
/ on
remote
control)
button to start
play.
Play begins
with the disc on the left hand side
tray
before
closing
the disc
compartment.
All the discs
are
played
once
only.
During playback
A
tray
which has no disc is
skipped
and
play
proceeds
to the next
tray.
The indicator of the
skipped tray
number
goes
out in the
display.
To
stop play
Press the STOP/CLEAR button.
To
pause
Press the CDII/SET/COUNTER RESET
(or
/ on
remote
control)
button.
To resume
play, press
it
again.
To
skip
discs
During play
or in the
stop
mode,
press
the DISC
SKIP button.
During play
Play begins automatically
after
skipping.
In
the
stop
mode
The
changer skips
to the next
disc,
but the
player
remains
stopped.
Press the PLAY
( ) (or
/ on
remote
control)
button to
play
the next disc.
Play
begins
and all the discs are
played
once.
To
play
one disc
only
Press one of the DISC DIRECT
PLAY(DISC 1,2,3)
buttons to start
play.
To remove discs
Press the CD OPEN/CLOSE button to
open
the disc
compartment.
You can remove two discs. To remove
the disc on the back
tray, press
the DISC SKIP
button to rotate the disc
tray.
Changing
Discs
During Play
Two discs can be
changed
while the other
remaining
disc is
played.
This
operation
is not
applicable during programmed
play.
1. Press the CD OPEN/CLOSE button to
open
the
disc
compartment.
2. Remove the discs and
replace
with other discs.
The disc
placed
on the left side
tray
will be
played
next.
3. Press the CD OPEN/CLOSE button to close the
disc
compartment.
NOTES
Do not
place
more than one
compact
disc on one
disc
tray
at the same time.
If,
during
CD
play,
the video
image
of a
nearby
television is
distorted,
or if static is heard from a
nearby
radio,
move this unit further
away
from the
affected television or radio.
Searching
for a Particular Point
in
a Track
You can locate a
particular point
in a track
during
play by monitoring
the
high-speed cueing
sound or
observing
the CD counter in the
display.
To search back:
Keep
the button
pressed
and release it at the
desired
point.
To search forward:
Keep
the button
pressed
and release it at the
desired
point.
Number 1 disc Number 2 disc
Do not tilt the unit with discs loaded. This
may
dislodge
the discs.
Usage
under these
conditions
may damage
the discs.