Owner's Manual

To
listen to the
Radio
1. Press the "TUNER/BAND" button
repeatedly
to choose either AM or FM
radio.
2. To tune to the desired station with
automatic
tuning, keep
"TUNING
(+)/(-) ,
(
or
)"
button
depressed
for more than 1 second.
To tune to the desired station with manu-
al
tuning, press
the "TUNING
(+)/(-)
,
(
or
)"
button within 1
second
repeatedly.
3. When
listening
to FM stations
press
the
"MODE/RIF" button for FM stereo
reception.
The "STEREO" will
appear
in
the
display.When
a weak FM station is
being received-press
the "MODE/RIF"
button so that "STEREO" is cleared
from the
display.
NOTE: Use "MODE/RIF"
(Radio
Interference
Filter)
button to
switch to mono
reception
if stereo
reception
is distorted
by
noise.
When
recording
the
MW(AM)
or LW
broadcast,
beat noises occur. If it
does,
press
this button once.
Presetting
the stations
1.To clear
any programm previously
stored
in
any memory.
(1)
Press the "PROG./MEMO." button for
2 seconds in TUNER mode so that
"RESET" flashes in the
display.
(2)
Press the
"
STOP/CLEAR" button
while "RESET" is
flashing
in the
display.
2. To memorize the stations in order
(1)
Press the "TUNER/BAND" button to
select a desired wave band.
(2)
Press the "TUNING
(+)/(-) (
or
)"
button to select a
desired station.
(3)
Press the "PROG./MEMO." button on
the unit and
preset
number flashes.
(4)
Press the "PROG./MEMO." button
again
on the unit while
preset
number
is
flashing.
(5) Repeat step (2)
to
(4)
to memorized
up
to 30 stations.
3. To memorize in selection channel
number.
(1)Select
a desired station.
(2)Press
the "PROG./MEMO." button on
the unit.
(3)Select
a desired channel number
by
pressing
the "PRESET
(+)/(-)
or
PRESET
"
button,
while the
pre-
set number flashes.
(4)Press
the "PROG./MEMO" button on
the unit
,while
the
preset
number flash-
es.
4.To memorize and add channel number.
(1)Select
a desired station.
(2)Press
the "PROG./MEMO." button on
the unit.
(3)Press
the "PROG./MEMO." button
again
on the unit while the channel
number is
flashing.
5.To recall
presets
Press and hold the "PRESET
(+)/(-)
or
PRESET
"
button until the desired
preset
number
appears
or
press
it
repeatedly.
10
TUNER FUNCTIONS