Owner's Manual

Audio
Adjustment
10
Volume
Adjustment
?
Tu r n VOLUME DOWN/UP
knob
clockwise to increase
the sound
level,
or counterclockwise to decrease it.
?
Press VOLUME CONTROL
( )
to increase the
sound
level,
or
press
the VOLUME CONTROL
( )
to
decrease it on the remote control.
Sound
Quality Adjustment
?
To
activate stereo sound
-
You can choose between 8 fixed sound
impressions.
Select a desired sound mode
by using
the
EQ
PATT.
button
(EQ
on the front
panel).
-
Each
you press
the button the indication
changes
as
follows.
FLAT
→
ROCK
→
POP
→
VOCAL
↑
SAMBA
←
SALSA
←
JAZZ
←
CLASSIC
?
Headphone
Jack
Connect a stereo
headphone plug ( 6.3mm)
into the
headphone jack.
The
speakers
are
automatically
disconnected when
you plug
in the
headphones (not supplied).
MUTE
Press MUTE to mute
your
unit.
You can mute
your
unit in
order,
for
example,
to answer
the
telephone,
"MUTE" indicator flashes in the
display
window.
SURROUND
To
activate surround mode
?
You can choose between 6 fixed sound
impressions.
?
Select a desired surround mode
by using
the
SURROUND button.
?
Each
you press
the button the indication
changes
as
follows.
SURROUND OFF
→
SIMULATED LOW
→
SIMULATED HIGH
↑
MOVIE HIGH
←
MOVIE LOW
←
MUSIC HIGH
←
MUSIC LOW
DISPLAY MODE
Whenever
you press
DISPLAY
MODE,
you
can
enjoy
the
spectrum change
with 6
types
in the
display.
XDSS
(Extreme
Dynamic
Sound
System)
-
Press XDSS to reinforce
treble,
bass and surround
effect.
-
Each
you press
the button the indication
changes
as
follows.
XDSSOFF→XDSS1ON→XDSS2ON
DEMO
Press DEMO in
power
off state to demonstrate the
function in the
display.
To cancel
it,
press
POWER or DEMO
again. During
demonstration in
power-on
status
you
can cancel it
by using
the other buttons.
DIMMER
This function is darken the
display
window
by
half in
power-on
status. Press DIMMER
once,
and the
display
is
darken,
and if
you press
it once
more,
the
display
will
darken
by
half too. To cancel it
press
the button
again.
Reception
of RDS
(Radio
Data
System)
Stations
-
OPTIONAL
What is
RDS?
RDS
(Radio
Data
System)
is a
system gradually being
introduced on FM in
many
countries,
where
by
an
inaudible stream of data is transmitted in addition to the
normal radio
signal.
This data contains various informa-
tion
including
station/ transmitter
identification,
traffic
information and a list of alternative
frequencies
for the
radio station
being
received.
1
Press
TUNER/BAND
repeatedly
to select
FM.
2
Select
a
desired station
by pressing
TUNING
/.
When the RDS transmission is
received,
the dis-
play
shows the
program
service name
(PS)
after
RDS indicator
appears.
3
Press the
RDS
to recall the
frequency.
Notes
?
RDS is
only
available for FM
reception.
?
The PS
(PROGRAM SERVICE)
NAME is
displayed
automatically
when a RDS station is received.
1
Connect an
auxiliary
device i.e. TV or
VCR,
via the rear mounted AUX
phone jacks.
2
Press AUX.
Auxiliary
Function
Notes
You can also record from the
auxiliary input
source,
see
Recording
Section.