MK_FFH-886/986(ENG)-A065S HIGH PERFORMANCE MINI COMPONENT OWNER'S MANUAL MODEL : FFH-886AD FE-886E FFH-986AD FE-986E Please read this manual carefully before operating your set. Retain it for future reference. Designs and notice for specifications improvement.
Precautions CAUTION CAUTION Use of controls or adjustments or performance specified herein may cedures other than those RISK OF ELECTRIC in hazardous radiation of proresult exposure. SHOCK DO NOT OPEN Laser CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE ting component in this product is capable of emit- radiation exceeding the limit for Class 1. COVER(OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Table of Contents INTRODUCTION Precautions...............................2 OPERATION TableofContents..........................3 Presettingtheradiostations.................11 BeforeUse................................4 Listeningtotheradio......................12 SafetyPrecautions........................4 NotesonDiscs..........................4 NotesonRemoteControl...................4 FrontPanel/RearPanel.....................5 TapePlayback............................13 BasicPlayback....................
Before Use shipping ture the unit The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. To near use volatile liquids, such as the unit. Do not leave rubber contact with the unit for leave marks Cleaning a insecticide spray, or long period plastic products in of time. They will the surface. on a Notes soft, dry cloth. If the surfaces soft cloth use a solution.
Front Panel/Rear Panel 23 22 21 AM FM AM 20 19 18 17 1 324 56 24 FM L 16 78 25 R 15 910 L+ - 14 1112 26 - R+ 13 28 27 1. POWER 2. ? PLAY MODE button ? COUNTER RESET button (STANDBY/ON) : OPTIONAL (COUNTER) button : OPTIONAL 3. 11. PUSH OPEN DEMO button ? CD SYNC. button ? NORMAL DUBBING button 14. HIGH DUBBING button 15. 13. 5. RECORD/ RECORD PAUSE ( REC ) button FUNCTION SELECT buttons ? 18.
Remote Control 1. 1 X 2345 XDSS button 2. POWER button 17 3. TUNER/BAND button 4. AUX button 16 5. PRESET 15 6. CD FUNCTION buttons PLAY/ PAUSE ( button ? FAST REWIND/ FAST FORWARD PLAY 6 ( 12 11 10 button CD STOP( ?CDSKIP( 13 78 ) ? ? 14 ( ) button ) button ) / REPEAT button ? 7. DISPLAY MODE button 8. CLOCK button 9.
Connections Speaker System Connect the Connection speakers using the supplied speaker cords by matching the colors of the terminals and those possible surround sound, adjust the speaker parameters (distance, level, etc.). of the cords. To obtain the best FM L R INTRODUC red L+ - black - R+ Right speaker Left speaker red Notes ? Be to match the sure are speaker cord to the appropriate terminal on the components: + to + and -- to --.
the Setting Voltage (OPTIONAL) If your set is equipped with a voltage selector at the back the AC power cord. side, be to set it to your local power sure supplied before connecting the CLOCK Setting 1 Press CLOCK. (If CLOCK for - 2 the clock is The hours Select 24 hour a turning requires setting, press more than 2 seconds.) begin to blink. cycle cycle by (24HR) or Press SET to confirm the selected hour When the To cycle.
Timer Function With the TIMER function you can have the radio reception and and recording turned on and off at the time desired. 1 Press CLOCK to check the current time. CD recording, play, tape play 2 (If "TIMER" button The previous more than 2 on TUNER-CD-TAPE flashes in the time and : Press SET when the desired function is 3 flashing. flashes in the 10 Set the hour to switch off 11 Press SET. 12 Set the minute to switch off 13 Press SET. display.
Audio Volume Adjustment ? the sound ? level, level, decrease it Sound or on ( press the VOLUME CONTROL the remote control. ( You to ) XDSS OFF Quality Adjustment impressions and 1 USER MODE. Select buton - a ( desired sound mode or turning EQ knob When you select USER button repeatedly. You can the EQ PATT. by using the front on panel). MODE, press the ENTER select Three of sound mode Each you press the button the indication follows.
Presetting You preset can the radio stations 30 stations for FM and AM. Before tuning, make sure that you have turned down the volume to the minimum. X TUNER/ OPERATION BAND POWER PRESET ( ) TUNER MEMO MULTI JOG SHUTTLE ? TUNING DOWN/UP ? PRESET DOWN/UP ? STOP ( )/ CLEAR Press POWER to turn To tune in the unit. on 1 2 AM appears in the 3 And then every time you press TUNER or TUNER/BAND, FM and AM changes alternately.
Listening to the radio Preset radio stations in the units memory first (see "Presetting radio stations" on the previous page). X TUNER/ BAND PRESET ( VOLUME () ) POWER MODE/RIF VOLUME DOWN/ TUNER 1 2 UP KNOB Press TUNER ?TUNING DOWN/UP ?PRESET DOWN/UP or appears in the TUNER/BAND until AM display or To turn off the radio FM Press POWER to turn the unit off window. function mode The last received station is tuned in.
Tape Playback X PLAY MODE NOR./Hi DUBB TAPE / PLAY( / ) STOP( TAPE-A/B ) ?/ / ?PLAY( ? Basic 1 STOP ( ) )/ CLEAR To Playback Press TAPE repeatedly or TAPE-A/B to select TAPE Stop Play Press STOP( ) during playback. AorTAPEB. TAPE" appears in the ("NO Tape Counter display window.) Reset Press COUNTER cassette TAPE A 2 3 Insert tape side to the bottom and then close the TAPE A (or B). 4 Press PLAY PUSH OPEN (or B) by pushing position.
Recording Wind the tape Use normal You only can to the point recording starts. tapes. record from cassette deck B only. X TUNER/ BAND PLAY MODE CD SYNC. REC CD, TUNER / PLAY( ) TAPE STOP( ) ?/ ?PRESET DOWN ?PLAY( / ?STOP Basic 1 Setting Press CD or TUNER/BAND.
CD Playback DISC SKIP X PLAY/ PAUSE DISC () CD OPEN/ 1,2,3 CLOSE( OPERATION ) POWER STOP( ) D.SKIP ?/ / ?PLAY( ?STOP ?CD Basic )/ PAUSE ) CLEAR (CD ) To Pause Playback Press POWER to turn 1 ( on Play Press CD PAUSE the unit. (CD ) or PLAY/ PAUSE ( during playback. Press this button 2 Press the CD button to enter the CD mode. To If Press no disc is entered in the disc DISC" indicator is Press CD 3 drawer, the "NO displayed.
CD Playback (Cont'd) X CD OPEN/CLOSE( ) REPEAT To Replace You can discs during Playback open the disc tray check what discs are to be discs without 1 during playing a disc to played next and replace interrupting playback of the current disc. Press the CD OPEN/CLOSE ( ). To Repeat Play To play - "REPEAT 1" To The disc tray is opened. Two disc compartments appear. Even if the unit is playing a disc, it doesn't stop playing. 2 discs in the compartments with ones.
CD Playback (Cont'd) DISC 1,2,3 X PLAY/ PAUSE () PROGRAM CD STOP () PROG. / ?PLAY( ? ? To Program Play You can ) PRESET DOWN/UP STOP ( )CLEAR To check program contents arrange the order of the tracks own program. The program create your on the discs and can contain up Press - to 20 tracks. PROG. (or PROGRAM on the remote control) stop mode. The disc, track and program number will be displayed. on the To clear program contents 1 Press PROG.
Troubleshooting Check the following guide for the possible cause of a problem before Cause Symptom Correction No power. ? The power cord is disconnected. ? No sound. ? The audio cables ? are not connected securely. ? ? The power of the external ment is switched off. The playback. Plug the power securely. cord into the wall outlet Connect the audio cable into the jacks securely. Digital Audio to the wrong The unit does not start service. contacting Output position.
Specifications MODEL SECTION Power [Genral] Power AM (MW) [Amp] [TAPE] consumption x H x D) Frequency response Signal-to-noise ratio Dynamic range Tuning Range Intermediate Frequency Signal to Noise Ratio Designs of the unit. 280 x 40 18000 Hz - 370 x 399 REF NC 70 dB 70 dB 87.5 108.0 MHz - 10.7 MHz 61/58 dB 10000 Hz 60 Tuning Range Intermediate Frequency Signal to Noise Ratio Frequency Response Output Power 522-1611kHzor530-1610kHz T.H.D 0.
P/NO : 3828R-A065S