Owner's Manual

39
ENGLISH
Symptoms Reason Solution
Washing
machine does
not start
Electrical power cord may not be
plugged in or connection may be
loose.
•
Make sure plug ts tightly in wall outlet.
House fuse blown, circuit breaker
tripped,or a power outage has
occurred.
•
Reset circuit breaker or replace fuse. Do not
increase fuse capacity. If problem is a circuit
overload, have it corrected by a qualied
electrician.
Water supply tap is not turned on.
•
Turn on water supply tap.
Washing
machine will
not spin
Check that the door is rmly shut.
•
Close the door and press the
Start/Pause
button. After pressing the
Start/Pause
button,
it may take a few moments before the washing
machine begins to spin. The door must be
locked before spin can be achieved. Add 1
or 2 similar items to help balance the load.
Rearrange load to allow proper spinning.
Door does not
open
•
Once washing machine has started, the door
cannot be opened for safety reasons. Check
if the ‘Door Lock’ icon is illuminated. You can
safely open the door after the ‘Door Lock’ icon
turns off.
Wash cycle
time delayed
•
The washing time may vary by the amount of
laundry, water pressure, water temperature
and other usage conditions. If an imbalance is
detected or if the suds removing programme is
on, the wash time will increase.
Fabric softener
overow
Too much softener may cause an
overow.
•
Follow softener guidelines to ensure appropriate
amount is used. Do not exceed the maximum ll
line.
Softeners
dispensed too
early
•
Close the dispenser drawer slowly. Do not open
the drawer during the wash cycle.