Owner's Manual

40
Symptoms Reason Solution
Not drying
Depending on the type and
thickness of fabric, dry time and
performance might be different.
•
Dry again with Time dry cycle.
After drying cycle, warm clothes
might be felt wet a little to prevent
damage or wrinkle.
•
Hang out the clothes in cool place.
The appliance is overloaded.
•
Check the load capacity for the selected cycle. If
necessary, add a Time dry cycle.
Dry performance can be decreased
for blankets or bulky clothes due to
little movement space during drying.
•
Rearrange clothes and use Time dry cycle.
Clothes are stuck on drum after
spinnig.
The spin speed is too low or it does
not use spin course.
•
Select the highest spin speed allowed for the
wash cycle.
Water pressure is week or water is
not supplied.
•
Check whether water supply tap is closed or not.
Check whether inlet kose is kinked or not.
Check whether inlet valve lter is blocked or not.
Water does not drain properly.
•
Check whether pump lter is clogged or not.
Check whether drain hose is kinked or not.
Long dry time
The actual drying time might vary
from the estimated drying time for
the sensor dry cycles.
Drying time can be affected by
the type of fabric, load size, and
selected dry level.
•
This is normal. This function is applied to satisfy
effcient drying performance.