The 563LE Flat Panel Monitor has Transistor) active matrix TFT (Thin-Film (Liquid Crystal Display). designed for use in small working areas or for those who need This monitor is more an LCD working space on the desk. Features The 563LE is a 15.0-inch (15.0 inches viewable) intelligent micropro-cessor based monitor. Digitally controlled auto-scanning is done with the microprocessor for horizontal frequencies between 31 and 61kHz, and vertical scan frequencies scan between 56 and 75Hz.
Connecting the Monitor On the back of the monitor power 1 2 cord, Power off both the monitor and PC. Connect the 15 pin VGA connector of supplied signal cable to the output matching input connector on the rear of the monitor. The connectors will mate only one way. If you cannot attach the cable easily, turn the connector upside down and try again. When mated, tighten the thumbscrews to secure the connection.
Location and Function of Controls Front View Power Indicator Power Button OSD ??? AUTO/SET ? ?? OSD Button AUTO/SET Button Buttons VESA wall Rear View mounting Connected to another object (stand type and wall-mounted type optional) - ID Label ? ?? Kensington Security Slot a locking Connected to D-Sub Connecter Signal DC Power Connecter + - NOTE : This monitor accept a 75mm x 75mm A3 cable that can be purchased separately most computer VESA-compliant mounting at stores i
Control Panel Function Front Panel Controls Buttons Power Button OSD Button OSD AUTO/SET AUTO/SET Button Power Control OSD (DPMS) Indicator Function Use this button to enter and from the OSD Button Buttons Use these buttons to choose the on display (OSD). screen on screen or adjust items in display. Brightness and Contrast can be adjusted directly without entering the On Screen Display (OSD) system.
On Screen Display (OSD) Control Adjustment Making adjustments to the image size, position and operating parameters of the monitor are quick and easy with the On Screen Display Control system. A quick example is given below to familiarize you with the use of the controls. Following section is an outline of the available adjustments and selections you can make using the OSD.
On Screen You Display(OSD) Selection introduced to the were and Adjustment procedure of selection and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the items that are shown on the Menu. OSD Adjust Description Brightness BRIGHTNESS CONTRAST Used to 88 adjust the brightness of the screen. 100 Contrast the desired.
On Screen Display(OSD) Selection OSD and Adjust Adjustment Description CLOCK TRACKING To minimize any vertical bars stripes visible on the screen background.The horizontal change. CLOCK or screen size will also PHASE To PHASE adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image LANGUAGE To choose the SETUP control LANGUAGE of characters. language in which displayed.
Video Memory Modes The monitor has 30 memory locations for factory preset to popular video modes. display modes, 14 of which are Display Modes (Resolution) Display Modes (Resolution) 123456789 Horizontal Freq.(kHz) Vertical Freq.(Hz) VGA 640 x 350 31.47 VGA 720 x 400 31.47 70 VGA 640 x 480 31.47 60 70 MAC 640 x 480 35.00 67 VESA 640 x 480 37.86 73 VESA 640 x 480 37.50 75 VESA 800 x 600 35.16 56 VESA 800 x 600 37.88 60 VESA 800 x 600 48.
Check the following before calling for service. Display Position is incorrect. Push the AUTO/SET Button. If the results are unsatisfactory, and V On the position icon in the screen adjust the image position using display. background, vertical bars or stripes Push the AUTO/SET Button. If the results are unsatisfactory, decrease the vertical bars CLOCK icon in the on screen or in any image or are visible. stripes using characters Push the AUTO/SET Button.
Specifications Display 15.0inch Viewable Size (38.1cm) Flat Panel Active matrix-TFT LCD, coating 15.0inch (38.1cm) Pixel 0.3 Type Anti-Glare Sync Input pitch Horizontal 31 Vertical 56 Freq. Freq. Input Form Signal Input Video Input Resolution 0.3mm x 61kHz (Automatic) (Automatic) Separate TTL, Positive/Negative 15 pin D-Sub Connector - - 75Hz Display Area Input Form 304 Max VESA 1024 VESA 1024 Recommend x 228mm / 12.0 Separate, RGB Analog, x 9.0inch 0.
