Owner's Manual

Description
of Controls
A4
Remote Controller
For the detailed instruction for each button of the remote
control,
refer to the
appropriate pages
in
this manual.
APC
(Auto
Picture
Control)
Button
MENU Button
VOLUME( )
Buttons
SET Button
SOURCE Selection
Button
AUTO Button
This function is suitable for
analog signal input only.
This
button is for the automatic
adjustment
of the screen
position,
clock and
phase.
Note:
Some
signal
from some
graphics
boards
may
not function
properly.
If the results are
unsatisfactory, adjust your
monitor's
Position,
Clock and Phase
manually.
MUTE Button
To select mute on or off.
DOWN/UP
( )
Buttons
PIP
Button
The sub-screen is
changed
in
the order shown below.
:
SMALL
->
MEDIUM
->
LARGE
->
OFF
VCR Buttons
These are the buttons for
VCR control.
Refer to the owner's manual
of
your
VCR as well.
Power Button
The
buttons cannot
be
set
in
this model.
To select
day/night
video
adjustment:
The
brightness
and the contrast of an
image
are
automatically adjusted
depending
on the environment
such that
they
are increased
during
the
day
and decreased
during
the
night.
This function is
only applicable
to the Video
Mode(
V1,
V2
).
:
OFF
->
CLEAR
->
NIGHT
PAGE A2
PAGE A2
PAGE A2
PAGE A2
PAGE A2
PAGE A2