The 575LM Flat Panel Monitor has Transistor) active matrix TFT (Thin-Film (Liquid Crystal Display). designed for use in small working areas or for those who need This monitor is more an LCD working space on the desk. Features The 575LM is a 15 inch (15 inches viewable) intelligent micropro-cessor based monitor.
Connecting the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow these steps: 1 Power off both the monitor and computer. 2 Slightly 3 Connect rear 4 on Stand cover. end of the monitor of the monitor. signal cable to the press and pull the latch one panel Connect the other end to the computer and tighter the pin ' 5 15-pin screws.
Connecting the Monitor Connection the Audio 1. Connect the 2. Connect the one end of Audio DC power cable,which is attached on the speaker to AUDIO DC OUT connector 1 and the other end to DC 12V connector 2 on the back of the speaker.Then connect the audio cable port which is directly connected to the speaker to AUDIO L-OUT port 3 3. Connect the audio cable from the Speaker's AUDIO IN port output port of your computer's sound card. speaker as described in below picture. .
Location and Function of Controls Front View Speaker SOUND SOUND Power Button Power Indicator OSD Button Buttons AUTO/SET Button VESA wall Rear View mounting Connected to another object (stand type wall-mounted - and type optional) 12V V 12V AUDOI DC OUT UOIOUT C Audio DC Power Cable Audio Cable Audio Buttons Kensington Security Slot a locking Connected to Stand Cover cable that can be purchased separately most A4 computer stores at
Control Panel Function Front Panel Controls OSD Button AUTO/SET Button Power Button Button Power Indicator Control Function OSD Button Use this button to enter Button or exit the Use these buttons to choose screen or display. on screen adjust items in the on display. Brightness and Contrast can be adjusted directly without entering the On Screen Display (OSD) buttons to adjust the system. Touch the settings and then the OSD button to save all changes.
On Screen Display (OSD) Control Adjustment Making adjustments to the image size, position and operating parameters of the monitor are quick and easy with the On Screen Display Control system. A quick example is given below to familiarize you with the use of the controls. Following section is an outline of the available adjustments and selections you can make using the OSD.
On Screen You were using Display(OSD) Selection introduced to the Adjustment procedure of selection and adjusting an item the OSD system. Listed below are and shown are the icons, icon names, and icon descriptions of the items that the Menu. on OSD Adjust Description Brightness BRIGHTNESS CONTRAST Used to 88 adjust the brightness of the screen. 100 Contrast Adjust the display to the contrast desired.
On Screen Display(OSD) Selection OSD and Adjust Adjustment Description To minimize any vertical bars or stripes visible on the screen background.The CLOCK horizontal PHASE To screen adjust the size will also focus of the item allows you to noise and clear or change. This display. any horizontal sharpen the image of remove characters. LANGUAGE To choose the control OSD POSITION To the adjust position the of the OSD window screen.
The monitor has 30 memory locations for factory preset to popular video modes. display modes, 14 of which are Display Modes (Resolution) 1 VGA 640 x 350 31.47 70 23 45 67 89 VGA 720 x 400 31.47 70 VGA 640 x 480 31.47 60 MAC 640 x 480 35.00 67 VESA 640 x 480 37.86 73 VESA 640 x 480 37.50 75 VESA 800 x 600 35.16 56 VESA 800 x 600 37.88 60 VESA 800 x 600 48.08 72 75 10 VESA 800 x 600 46.88 11 MAC 832 x 624 49.
Troubleshooting Check the following before calling for service. Display Position is incorrect. Push the AUTO/SET Button. If the results are unsatisfactory, adjust the V position icon in the on screen display. On the screen background, vertical bars or stripes are in any image or or and or stripes using the characters Push the AUTO/SET Button. If the results are unsatisfactory, decrease the horizontal bars in the on screen display. NO SIGNAL message.
Specifications Display Viewable Size (38.1cm) Flat Panel Active matrix-TFT LCD coating 15inch (38.1cm) Pixel 0.3 15inch Type Anti-Glare Sync Input Video Input pitch 0.3mm x Horizontal Freq. Vertical Freq. 31kHz 61kHz (Automatic) 56Hz 75Hz (Automatic) Input form Signal input Separate, TTL, Positive/Negative 15 pin D-Sub connector Display Area Input Form 304 Max VESA 1024 x Recommend VESA 1024 x - - x 228mm / 12.0 x 9.0inch Separate, RGB Analog, 0.
