The FLATRON LCD 575LM Flat Panel Monitor has an active matrix TFT (Thin-Film Transistor) LCD (Liquid Crystal Display). This monitor is more designed for use in small working areas or for those who need working space on the desk. Features The FLATRON LCD 575LM is micropro-cessor based a 15.1-inch inches (15.1 viewable) intelligent monitor.
Connecting the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow these steps: 1 Power off both the monitor and computer. 2 Slightly 3 Connect rear 4 on Stand cover. end of the monitor of the monitor. signal cable to the press and pull the latch one panel Connect the other end to the computer and tighter the pin 15-pin screws.
Connecting the Monitor Connection the Audio 1. Connect the 2. Connect the one end of Audio DC power cable,which is attached on the speaker to AUDIO DC OUT connector 1 and the other end to DC 24V connector 2 on the back of the speaker.Then connect the audio cable port which is directly connected to the speaker to AUDIO L-OUT port 3 3. Connect the audio cable from the Speaker's AUDIO IN port output port of your computer's sound card. speaker as described in below picture. .
Location and Function of Controls Front View Speaker SOUND SOUND Power Button Power Indicator OSD Button Buttons AUTO/SET Button Rear View 24V AUDOI DC OUT UDOIOUT DC Audio DC Power Cable Audio Cable Stand Audio Buttons A4 cover
Control Panel Function Front Panel Controls OSD Button AUTO/SET Button Power Button Button Power Indicator Control Function OSD Button Use this button to enter or exit the Use these buttons to choose Button screen or on screen display. adjust items in the on display. Brightness and Contrast can be adjusted directly without entering the On Screen Display (OSD) system. Touch the buttons to adjust the settings and then the OSD button to save all changes.
On Screen Display (OSD) Control Adjustment Making adjustments to the image size, position and operating parameters of the monitor are quick and easy with the On Screen Display Control system. A quick example is given below to familiarize you with the use of the controls. Following section is an outline of the available adjustments and selections you can make using the OSD.
On Screen You introduced to the were using Display(OSD) the OSD Listed below are shown OSD Adjustment procedure of selection and adjusting an item system. are on Selection and the icons, icon names, and icon descriptions of the items that the Menu. Adjust Description Brightness BRIGHTNESS CONTRAST Used to 88 adjust the brightness of the screen. 100 Contrast the desired.
On Screen Display(OSD) OSD Selection and Adjust Adjustment Description CLOCK TRACKING To minimize any vertical bars stripes visible on the screen background.The horizontal change. CLOCK or screen size will also PHASE To PHASE adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. LANGUAGE To choose the SETUP LANGUAGE ENGLISH IMAGE SIZE FULL control language in which displayed.
The monitor has 26 memory locations for factory preset to popular video modes. display modes, 16 of which are Display Modes (Resolution) VGA 640 x 350 31.47 70 VGA 720 x 400 31.47 70 123456789 VGA 640 x 480 31.47 60 MAC 640 x 480 35.00 67 VESA 640 x 480 37.50 75 VESA 640 x 480 43.27 85 VESA 800 x 600 35.16 56 VESA 800 x 600 37.88 60 MAC 800 x 600 48.08 72 10 VESA 800 x 600 46.88 75 11 VESA 800 x 600 53.67 85 12 MAC 832 x 624 49.
Troubleshooting Check the Display following before calling for service. Position is incorrect. Push the AUTO/SET Button. If the results are unsatisfactory, adjust the V position icon in the on screen display. On the screen background, vertical bars or stripes are noise in any appearing image or or and or stripes using the characters Push the AUTO/SET Button. If the results are unsatisfactory, decrease the horizontal bars in the on screen display. NO SIGNAL message.
Specifications Display Sync Input 15.1inch Viewable Size Anti-Glare coating 15.1inch (38.35cm) Pixel 0.3 pitch Input 0.3mm x True color 16.7 million color Horizontal 31kHz 69kHz Vertical 56Hz 85Hz Freq. Freq. (Automatic) (Automatic) Separate, TTL, Positive/Negative 15 pin D-Sub connector - - Input form Signal input Video (38.35cm) Flat Panel Active matrix-TFT LCD Type 230mm / 12.1 Display Area Input Form 307 Resolution VESA 1024 x Separate, RGB x 9.1inch Analog, 0.
