The Monitor has an active matrix TFT (Thin-Film Transistor) LCD (Liquid Crystal Display). This monitor is designed for use in small working areas or for those who need more working space on the desk. Features The Monitor is monitor. a 15 inch (15 inches viewable) intelligent micropro-cessor based Digitally controlled auto-scanning is done with the micro-processor for horizontal frequencies between 31 and 61kHz, and vertical scan frequencies scan between 56 75Hz.
the Monitor Connecting monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow these steps: To set up the 1 Power off both the monitor and 1' To 2 Connect rear 3 signal cable to the and tighter the 15-pin screws. Be connector sure input top of the stand. connector on the the on signal the real cable panel of the aligns with the 15- connector.
Making use of USB (Universal Serial Bus) USB (Universal Serial Bus) is an innovation in connecting your different desktop peripherals conveniently to your computer. By using the USB, you will be able to connect your mouse, keyboard, and other peripherals to your monitor instead of having to connect them to your computer. This will give you greater flexibility in setting up your system.
Location and Function of Controls Front View Power Button Power Indicator OSD Button Buttons AUTO/SET Button Rear View 2 DC Power Connector D-sub Signal Connector DC Power Connecter - + USB upstream port USB downstream port A4
Control Panel Function Front Panel Controls OSD Button AUTO/SET Button Power Button Button Power Indicator Control Function OSD Button Use this button to enter or exit the Use these buttons to choose Button screen or on screen display. adjust items in the on display. Brightness and Contrast can be adjusted directly without entering the On Screen Display (OSD) system.
On Screen Display (OSD) Control Adjustment Making adjustments to the image size, position and operating parameters of the monitor are quick and easy with the On Screen Display Control system. A quick example is given below to familiarize you with the use of the controls. Following section is an outline of the available adjustments and selections you can make using the OSD.
On Screen You Display(OSD) Selection introduced to the were and Adjustment procedure of selection and adjusting an item the OSD system. Listed below are the icons, icon names, and icon of the items that are shown on the Menu. using descriptions OSD Adjust Description Brightness BRIGHTNESS CONTRAST Used to 88 adjust the brightness of the screen. 100 Contrast the desired.
On Screen Display(OSD) Selection OSD and Adjust Adjustment Description CLOCK TRACKING To minimize any vertical bars stripes visible on the screen background.The horizontal change. CLOCK or screen size will also PHASE To PHASE adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the LANGUAGE To choose the SETUP control LANGUAGE of characters. image language in which displayed.
Video Memory Modes The monitor has 30 memory locations for factory preset to popular video modes. display modes, 14 of which are Display Modes (Resolution) Display Modes (Resolution) Horizontal Freq.(kHz) Vertical Freq.(Hz) 1 VGA 640 x 350 31.47 70 2 VGA 720 x 400 31.47 70 3 VGA 640 x 480 31.47 60 4 MAC 640 x 480 35.00 67 5 VESA 640 x 480 37.86 73 6 VESA 640 x 480 37.50 75 7 VESA 800 x 600 35.16 56 8 VESA 800 x 600 37.
Troubleshooting Check the Display following before calling for service. Position is incorrect. Push the AUTO/SET Button. If the results are unsatisfactory, adjust the V position icon in the on screen display. On the screen background, vertical bars or stripes are noise in any appearing image or or and or stripes using the characters Push the AUTO/SET Button. If the results are unsatisfactory, decrease the horizontal bars in the on screen display. NO SIGNAL message.
Specifications Display 15 inch Viewable Size Anti-Glare coating 15 inch (38.1cm) 0.297 x 0.297mm Pixel Sync Input Panel Active matrix-TFT LCD Type pitch (38.1cm) Flat True color 16 million color Horizontal 31kHz 61kHz Freq. - Vertical Freq. Input form (Automatic) 56Hz 75Hz (Automatic) - Separate TTL(Positive/Negative) 15 pin D-Sub connector Signal input Display Area Input Form Resolution (max.
