The Monitor has an active matrix TFT (Thin-Film Transistor) LCD (Liquid Crystal Display). This monitor is designed for use in small working areas or for those who need more working space on the desk. Features The monitoris 15 inch a (15 inches viewable) intelligent micropro-cessor based monitor.
Connecting the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow these steps: 1 Power off both the monitor and computer. 2 To adjust height of your monitor, unlock the stand lock Push the stand lock at arrows shown(figure A). 3 Connect rear 4 end of the monitor of the monitor. one panel Connect the other end to the computer and tighter the pin signal 15-pin screws.
Connecting the Monitor Connection the Audio 1. Connect the 2. Connect the one end of Audio DC power cable,which is attached on the speaker to AUDIO DC OUT connector 1 and the other end to DC 12V connector 2 on the back of the speaker.Then connect the audio cable port which is directly connected to the speaker to AUDIO L-OUT port 3 3. Connect the audio cable from the Speaker's AUDIO IN port output port of your computer's sound card. speaker as described in below picture. .
Making use of USB (Universal Serial Bus) (Universal Serial Bus) is an innovation in connecting your different desktop peripherals conveniently to your computer. By using the USB, you will be able to connect your mouse, keyboard, and other peripherals to your monitor instead of having to connect them to your computer. This will give you greater flexibility in setting up your system.
Location and Function of Controls Front View Speaker SOUND SOUND Power Button OSD Button Power Indicator Buttons AUTO/SET Button Rear View Stand Lock 12V OUT AUDOI DC DC Power Connector Audio DC Power Cable Audio Cable Audio Buttons USB downstream port USB upstream port A5
Control Panel Function Front Panel Controls OSD Button AUTO/SET Button Power Button Power Indicator Button Control Function OSD Button Use this button to enter or exit the Use these buttons to choose Button screen or on screen adjust display. items in the on display. Brightness and Contrast can be adjusted directly without entering the On Screen Display (OSD) system.
On Screen Display (OSD) Control Adjustment Making adjustments to the image size, position and operating parameters of the monitor are quick and easy with the On Screen Display Control system. A quick example is given below to familiarize you with the use of the controls. Following section is an outline of the available adjustments and selections you can make using the OSD.
On Screen You were Display(OSD) Selection introduced to the and Adjustment procedure of selection and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the items that are shown on the Menu. OSD Adjust Description Brightness BRIGHTNESS / CONTRAST Used to 88 adjust the brightness of the screen. 100 Contrast the desired.
On Screen Display(OSD) Selection OSD and Adjust Adjustment Description CLOCK TRACKING To minimize any vertical bars stripes visible on the screen background.The horizontal change. CLOCK or screen size will also PHASE To PHASE adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the LANGUAGE To choose the SETUP control LANGUAGE of characters. image language in which displayed.
Video Memory Modes The monitor has 30 memory locations for factory preset to popular video modes. display modes, 14 of which are Display Modes (Resolution) Display Modes (Resolution) 1 VGA 2 3 Horizontal Freq.(kHz) Vertical Freq.(Hz) 640 x 350 31.47 VGA 720 x 400 31.47 70 VGA 640 x 480 31.47 60 4 MAC 640 x 480 35.00 67 5 VESA 640 x 480 37.86 73 6 VESA 640 x 480 37.50 75 7 VESA 800 x 600 35.16 56 8 VESA 800 x 600 37.
Check the following before calling for service. Display Position is incorrect. Push the AUTO/SET Button. If the results are unsatisfactory, and V On the position icon in the screen adjust the image position using display. background, vertical bars or stripes Push the AUTO/SET Button. If the results are unsatisfactory, decrease the vertical bars CLOCK icon in the on screen or in any image or are visible. stripes using characters Push the AUTO/SET Button.
Specifications Display 15 inch Viewable Size Anti-Glare coating 15 inch (38.1cm) 0.3 x 0.3mm Pixel Sync Input pitch Horizontal Freq. Vertical Freq. 31kHz 61kHz Input form Separate, TTL, Positive/Negative - 56Hz 75Hz - 15 Signal input Video Input (38.1cm) Flat Panel Active matrix-TFT LCD Type Area (Automatic) (Automatic) pin D-Sub connector Display Input Form 304 x 228mm / 12.0 Separate, RGB Analog, x 9.0inch 0.
