Owner's Manual

Technical Information
A14
Low Radiation
Compliance
(MPR II)
Self
Diagnostics Messages
DDC
(Display
Data
Channel)
Low Radiation
Compliance
(MPR
II),
Self
Diagnostics
Messages
and DDC
(Display
Data
Channel)
This monitor meets one of the strictest
guidelines
available
today
for low
radiation
emissions,
offering
the user extra
shielding
and an antistatic
screen
coating.
These
guidelines,
set forth
by
a
government agency
in
Sweden,
limit the amount of emission allowed
in
the
Extremely
Low
Frequency (ELF)
and
Very
Low
Frequency (VLF) electromagnetic range.
Special
Self
Diagnostics messages
will
appear
on the screen when
identifying
the
following
monitor conditions:
NO SIGNAL
ThisOSDmaypopupwhenitisONbutno
signal
is detected.
In
this case the
message
NO SIGNAL
will
be
highlighted, alerting you
to check the
signal
cable connections.
OUT OF RANGE
This OSD
may appear
to inform
you
that the
signal being
sent to the monitor is not within
its
frequency range.
In
this
case,
you
would
need to check the resolution and refresh rate
you
have
your
video card set
to,
and
adjust
to
be within the
range
of the monitor.
DDC is a communication channel over which the monitor
automatically
informs the host
system (PC)
about its
capabilities.
This monitor has DDC
function;
DDC2B. DDC2B
carry
out uni-directional communication
between the PC and the monitor. Under these
situations,
the PC sends
display
data to the monitor but not commands to control the monitor
settings.
NOTE
PC must
support
DDC functions to do this.
If
your
monitor is
displaying
a mono chrome
image
or the
wrong
resolution,
select the DDC OFF function.
SELF DIAGNOSTICS
CHECK SIGNAL CABLE
NO SIGNAL
INPUT SIGNAL
OUT OF RANGE
POWER MANAGEMENT 20SEC