OWNER’S MANUAL BOTTOM FREEZER REFRIGERATOR Please read this owner's manual thoroughly before operating and keep it handy for reference at all times. GR-J31DID www.lg.
TABLE OF CONTENTS TABLE OF CONTENTS 3 4 7 PRODUCT FEATURES IMPORTANT SAFETY INSTRUCTIONS COMPONENTS 25 HOW TO USE 25 Before Use 26 Control Panel 26 - Control Panel Features 28 In-Door Ice Bin 28 - Detaching the In-Door Ice Bin 28 - Assembling the In-Door Ice Bin Automatic Icemaker 7 Refrigerator Exterior 29 8 Refrigerator Interior 29 -T urning the Automatic Icemaker On or Off 30 - When You Should Turn the Icemaker Off 30 - Normal Sounds You May Hear 30 - Preparing for Vacati
PRODUCT FEATURES PRODUCT FEATURES * Depending on the model, some of the following functions may not be available. FILTERED WATER AND ICE DISPENSER The water dispenser dispenses fresh, chilled water. The ice dispenser dispenses cubed and crushed ice. Door Alarm The Door Alarm function is designed to prevent refrigerator malfunctioning that could occur if a refrigerator door or freezer drawer remains open.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE. This guide contains many important safety messages. Always read and obey all safety messages. This is the safety alert symbol. It alerts you to safety messages that inform you of hazards that can kill or hurt you or others, or cause damage to the product. All safety messages will be preceded by the safety alert symbol and the hazard signal word WARNING or CAUTION.
IMPORTANT SAFETY INSTRUCTIONS 5 READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE. To reduce the risk of fire, electric shock, or personal injury when using your product, basic safety precautions should be followed, including the following. yy In the event of a refrigerant leak, move flammable objects away from the refrigerator. Ventilate sufficiently and contact an authorized service center.
IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE. To reduce the risk of fire, electric shock, or personal injury when using your product, basic safety precautions should be followed, including the following. WARNING yy Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. yy Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
COMPONENTS COMPONENTS Use this page to become more familiar with the parts and features of your refrigerator. Page references are included for your convenience. *The appearance and specifications of the actual product may differ depending on the model. Refrigerator Exterior Handle Filtered Water and Ice Dispenser Opens and closes the door. Dispenses purified water and ice.
COMPONENTS Refrigerator Interior LED interior lamps Adjustable Refrigerator Shelf The interior lamps light up the inside of the refrigerator. The shelves in your refrigerator are adjustable to meet your individual storage needs. Water filter Purifies water. Door-In-Door Case NOTE The filter should be replaced every 6 months. Please refer to the “Replacing the filter” section in this manual for details. * This function may not be available, depending on the model.
INSTALLATION 9 INSTALLATION Installation Overview Please read the following installation instructions first after purchasing this product or transporting it to another location. 1 Unpacking your refrigerator 4 Connecting the water supply and water line 2 Choosing the proper location 5 Leveling and Door Alignment Note Connect to potable water supply only.
INSTALLATION Unpacking Your Refrigerator WARNING yyUse two or more people to move and install the refrigerator. Failure to do so can result in back or other injury. yyYour refrigerator is heavy. When moving the refrigerator for cleaning or service, be sure to protect the floor. Always pull the refrigerator straight out when moving it. Do not wiggle or walk the refrigerator when trying to move it, as floor damage could occur.
INSTALLATION Ambient Temperature Install this appliance in an area where the temperature is between 55°F (13°C) and 110°F (43°C). If the temperature around the appliance is too low or high, cooling ability may be adversely affected. Do not store the refrigerator in Direct Sunlight or sheltered outdoor areas. 11 Removing/Assembling the Refrigerator Door Handles Note Removing the doors is always recommended when it is necessary to move the refrigerator through a narrow opening.
INSTALLATION Removing/Assembling the Freezer Drawer Handle Removing/Assembling the Doors and Drawers Removing the Handles Removing the doors is always recommended when it is necessary to move the refrigerator through a narrow opening. 1 Loosen the set screws located on the lower side of the handle with a 1/8 in. Allen wrench and remove the handle. 2 Loosen the mounting fasteners connect to the freezer drawer and handle using a 1/4 in. Allen wrench, and remove the mounting fasteners.
INSTALLATION 2 5 After disconnecting the water feed tube, open the left door. Remove the screw from the hinge cover at the top of the refrigerator. Lift the hook (not visible), located at the bottom of the front side of the cover with a flat-head screwdriver. Lift the door from the middle hinge pin and remove the door. Caution Place the door, inside facing up, on a non-scratching surface. 3 Remove the cover and pull out the tube Disconnect all wire harnesses .
INSTALLATION Removing the Right Refrigerator Door 1 4 Lift the door from the middle hinge pin and remove the door. Open the door. Remove the top hinge cover screw . Lift the hook (not visible), located at the bottom of the front side of the cover , with a flat-head screwdriver. Caution Place the door on the floor, inside facing up, on a non-scratching surface. 2 Detach the wire harness 3 Rotate the hinge lever Lift the top hinge lever latch. . clockwise.
INSTALLATION Assembling the Right Refrigerator Door Install the right-side door first. 1 Make sure that the plastic sleeve is inserted in the bottom of the door. Lower the door onto the middle hinge pin as shown in the figure. 2 Fit the top hinge over the hinge lever latch and slot it into place. Rotate the lever counterclockwise to secure the hinge. Hinge Lever Latch 3 Install the grounding screw and connect the wire harness .
INSTALLATION Assembling the Left Refrigerator Door 4 Push the water supply tube into the hole on the top case and pull it through the backplate. 5 Hold the water supply connection and gently push in the collet to connect the water supply line as shown in and . Insert the tube at least 5/8 inch (15 mm) into the connector. Assemble the clip to the joint part for fastening. Install the left refrigerator door after the right door is installed.
INSTALLATION 17 Removing the Freezer Drawers Note The top, middle and bottom drawers are all removed in the same way. In the following figures, the Pullout Drawer located above the freezer drawer is not shown for clarity. Collet Tube Insert Line Caution Clip 1) Gently press the Collet and insert the tube until only one line shows on the tube. (Correct) (Incorrect) yyUse two or more people to remove and install the freezer drawer. Failure to do so can result in back or other injury.
INSTALLATION 1 Pull the drawer open to full extension. 2 Gently lift and pull out the ice bin. (Images in the figure below may differ from the actual drawers of the refrigerator.) On the left rail, use a flat blade screwdriver to push in on the tab to release the drawer from the rail, as shown below. Once the left side is loose, push the tab on the right side with your finger to release the drawer. Lift the front of the drawer up, then pull it straight out.
INSTALLATION Assembling the Freezer Drawers 19 3 Lower the door into final position and tighten the screws located on both sides. 4 Insert drawer into the frame, and push drawer back into place until you hear a click. 5 Insert the lower basket in the rail assembly. (Images in the figure below may differ from the actual drawers of the refrigerator.) The top, middle and bottom drawers are all assembled in the same way.
INSTALLATION Connecting the Water Line Before You Begin This water line installation is not covered by the refrigerator warranty. Follow these instructions carefully to minimize the risk of expensive water damage. Water hammer (water banging in the pipes) in house plumbing can cause damage to refrigerator parts and can lead to water leakage or flooding. Call a qualified plumber to correct water hammer before installing the water supply line to the refrigerator.
INSTALLATION yy If your existing copper water line has a flared fitting at the end, you will need an adapter (available at plumbing supply stores) to connect the water line to the refrigerator OR you can cut off the flared fitting with a tube cutter and then use a compression fitting. yy Shutoff valve to connect to the cold water line. The shutoff valve should have a water inlet with a minimum inside diameter of 5/32 in. at the point of connection to the COLD WATER LINE.
INSTALLATION 4 FASTEN THE SHUTOFF VALVE Fasten the shutoff valve to the cold water pipe with the pipe clamp. 7 Pipe Clamp Saddle-Type Shutoff Valve Saddle-Type Shutoff Valve Vertical Cold Water Pipe Note Outlet Valve 8 TIGHTEN THE PIPE CLAMP Tighten the clamp screws until the sealing washer begins to swell. Washer Inlet End Clamp Screw Ferrule (sleeve) FLUSH OUT THE TUBING Turn the main water supply on and flush out the tubing until the water is clear.
INSTALLATION 23 10 TURN THE WATER ON AT THE SHUTOFF VALVE Tighten any connections that leak. Turning On The Power 1 Plug in the refrigerator. Caution Check to see if leaks occur at the water line connections. Caution 11 PLUG IN THE REFRIGERATOR Arrange the coil of tubing so that it does not vibrate against the back of the refrigerator or against the wall. Push the refrigerator back to the wall. 12 START THE ICEMAKER Set the icemaker power switch to the ON position.
INSTALLATION Leveling and Door Alignment Door Alignment Leveling The left refrigerator door has an adjustable nut, located on the bottom hinge, to raise and lower the door for proper alignment. After installing, plug the refrigerator’s power cord into a 3-prong grounded outlet and push the refrigerator into the final position. Your refrigerator has two front leveling legs— one on the right and one on the left. Adjust the legs to alter the tilt from front-to-back or sideto-side.
HOW TO USE 25 HOW TO USE Before use Clean the refrigerator. Clean your refrigerator thoroughly and wipe off all dust that accumulated during shipping. Caution yy Do not scratch the refrigerator with a sharp object or use a detergent that contains alcohol, a flammable liquid or an abrasive when removing any tape or adhesive from the refrigerator,. yy Do not peel off the model or serial number label or the technical information on the rear surface of the refrigerator.
HOW TO USE Control Panel * Depending on the model, some of the following functions may not be available. Control Panel Features Ice Selection Press the ice selection button to choose either cubed or crushed ice. The cubed or crushed ice icon will illuminate. Refrigerator Temperature Indicates the set temperature of the refrigerator compartment in Celsius (°C). Freezer Temperature Indicates the set temperature of the freezer compartment in Celsius (°C).
HOW TO USE 27 Control Panel Features (continued) Change Filter [ ( On some models) ] When the Change Filter icon turns on, the air filter needs to be replaced. After replacing the air filter, press and hold the Hygiene Fresh button for three seconds to turn the icon light off. It is recommended to change the air filter approximately every 6 months. Express Freezing This function increases both ice making and freezing capabilities.
HOW TO USE In-Door Ice Bin * Depending on the model, some of the following functions may not be available. 2 Caution To remove the in-door ice bin, grip the front handle, slightly lift the lower part, and slowly pull out the bin as shown. yy Keep hands and tools out of the ice compartment door and dispenser chute. Failure to do so may result in damage or personal injury. yy The icemaker will stop producing ice when the in-door ice bin is full.
HOW TO USE 29 Automatic Icemaker * Depending on the model, some of the following functions may not be available. Ice is made in the automatic icemaker and sent to the dispenser. The icemaker will produce 70~210 cubes in a 24-hour period, depending on freezer compartment temperature, room temperature, number of door openings and other operating conditions. yy It takes about 12 to 24 hours for a newly installed refrigerator to begin making ice. Wait 72 hours for full ice production to occur.
HOW TO USE Automatic Icemaker (continued) Caution yy The first ice and water dispensed may include particles or odor from the water supply line or the water tank. yy Throw away the first few batches of ice. This is also necessary if the refrigerator has not been used for a long time. yy Never store beverage cans or other items in the ice bin for the purpose of rapid cooling. Doing so may damage the icemaker or the containers may burst.
HOW TO USE Ice and Water Dispenser Incorrect Way 31 Correct Way * Depending on the model, some of the following functions may not be available. Water Caution Keep children away from the dispenser. Children may play with or damage the controls. Dispenser Ice Water switch Caution Ice switch Throw away the first few batches of ice (about 24 cubes). This is also necessary if the refrigerator has not been used for a long time.
HOW TO USE Storing Food Food Preservation Location Each compartment inside the refrigerator is designed to store different types of food. Store your food in the optimal space to enjoy the freshest taste. Vegetable storage (Crisper) Preserves vegetables and fruit. Ice storage bin If a large amount of ice is needed, transfer the ice in the in-door ice bin to the ice storage bin. ® Durabase Largest storage space in the freezer.
HOW TO USE 33 Food Storage Tips * The following tips may not be applicable depending on the model. Wrap or store food in the refrigerator in airtight and moisture-proof material unless otherwise noted. This prevents food odor and taste transfer throughout the refrigerator. For dated products, check date code to ensure freshness. Food How to Butter or Margarine Keep opened butter in a covered dish or closed compartment. When storing an extra supply, wrap in freezer packaging and freeze.
HOW TO USE Storing Frozen Food (continued) Packaging Successful freezing depends on correct packaging. When you close and seal the package, it must not allow air or moisture in or out. If it does, you could have food odor and taste transfer throughout the refrigerator and could also dry out frozen food.
HOW TO USE 35 Detaching and Assembling the Storage Bins Glide’N’Serve and Humidity Controlled Crisper To Remove the Glass (Pantry drawer not shown for clarity) Lift up the glass under the crisper cover, and pull up and out. To remove the Humidity Controlled Crisper and the Glide’N’Server, pull out the Crisper and Glide’N’Server to full extension, lift the front up, and pull straight out. Fixed Door Bins The door bins are removable for easy cleaning and adjustment.
HOW TO USE Door-In-Door Door-In-Door Case The Door-In-Door compartment allows for easy access of commonly used food items. To open the Door-In-Door case, slightly push the marked area to pop it open. The Door-InDoor Case is removable for easy cleaning and adjustment. The outer Door-In-Door door includes two door bins, the Cheese & Butter and Condiment bins, that are specially designed for food that can be stored at a warmer temperature. This makes spreading butter and slicing cheese easier.
HOW TO USE 37 Door-In-Door Door Bins Door-In-Door Lower Shelf The Door-In-Door inner and outer door bins are removable for easy cleaning. The Door-In-Door lower shelf is removable for easy cleaning. 1 To remove the door bins, lift up and pull out. 1 To remove the lower shelf, lift the shelf 2 To replace the door bins, slide the door bin in above the desired support and push down until it snaps into place. retainer up and out. 2 Remove the two screws from the shelf and pull it straight out.
HOW TO USE Adjusting the Refrigerator Shelves The shelves in your refrigerator are adjustable to meet your individual storage needs. Your model may have glass or wire shelves. Using the Folding Shelf You can store taller items, such as a gallon container or bottles, by simply pushing the front half of the shelf underneath the back half of the shelf. Pull the front of the shelf toward you to return to a full shelf.
MAINTENANCE 39 MAINTENANCE Cleaning yy Both the refrigerator and freezer sections defrost automatically; however, clean both sections about once a month to prevent odors. yy Wipe up spills immediately. yy Always unplug the refrigeration before cleaning. General Cleaning Tips yy Unplug refrigerator or disconnect power. yy Remove all removable parts, such as shelves, crispers, etc. yy Use a clean sponge or soft cloth and a mild detergent in warm water. Do not use abrasive or harsh cleaners.
MAINTENANCE Replacing the Hygiene Fresh Replacing the Water Filter It is recommended that you replace the air filter: It is recommended that you replace the water filter: yy Approximately every six months. yy When the CHANGE FILTER light turns on. 1 yy Approximately every six months. yy When the water filter indicator turns on. yy When the water dispenser output decreases. yy When the ice cubes are smaller than normal.
MAINTENANCE 1 Remove the old water filter. 3 After the water filter is replaced, dispense 2.5 gallons (9 litters) of water (flush for approximately 5 minutes) to remove trapped air and contaminates from the system. Do not dispense the entire 2.5 gallons (9 litters) amount continuously. Depress and release the dispenser pad for cycles of 30 seconds ON and 60 seconds OFF. 4 Water Filter Bypass Plug yy Lower or remove the top left shelf to allow the water filter to rotate all the way down.
SMART DIAGNOSIS SMART DIAGNOSIS Should you experience any problems with your refrigerator, it has the capability of transmitting data via your telephone to the LG service center. This gives you the capability of speaking directly to our trained specialists. The specialist records the data transmitted from your machine and uses it to analyze the issue, providing a fast and effective diagnosis. If you experience problems with your refrigerator, call 84733.
TROUBLESHOOTING 43 TROUBLESHOOTING Review the Troubleshooting section before calling for service; doing so will save you both time and money. Problem Refrigerator and Freezer section are not cooling. Cooling System runs too much. Possible Causes Solutions The refrigerator control is set to Turn the control ON. Refer to the Setting the OFF (some models). Controls section for proper temperature settings. Refrigerator is in the defrost cycle.
TROUBLESHOOTING Problem Possible Causes Refrigerator or Refrigerator was recently Freezer section is installed. too warm. Air vents are blocked. Doors are opened often or for long periods of time. Solutions It may take up to 24 hours for each compartment to reach the desired temperature. Rearrange items to allow air to flow throughout the compartment. Refer to the Airflow diagram in the Using Your Refrigerator section.
TROUBLESHOOTING 45 Problem Interior moisture buildup. Possible Causes Solutions Doors are opened often or for long periods of time. When the doors are opened often or for long periods of time, warm, humid air enters the compartment. This raises the temperature and moisture level within the compartment. To lessen the effect, reduce the frequency and duration of door openings. Doors not closed correctly. See the Doors will not close correctly section in the Troubleshooting section. Weather is humid.
TROUBLESHOOTING Problem Possible Causes Solutions Frost or ice Condensation from food with a crystals on frozen high water content has frozen food (inside of inside of the food package. sealed package). Food has been left in the freezer for a long period of time. This is normal for food items with a high water content. Icemaker is not making enough ice. Demand exceeds ice storage capacity. The icemaker will produce approximately 70~210 cubes in a 24 hour period.
TROUBLESHOOTING 47 Problem Icemaker is not making enough ice (continued). Possible Causes Solutions Doors are opened often or for long periods of time. If the doors of the unit are opened often, ambient air will warm the refrigerator which will prevent the unit from maintaining the set temperature. Lowering the refrigerator temperature can help, as well as not opening the doors as frequently. Doors are not closed completely. If the doors are not properly closed, ice production will be affected.
TROUBLESHOOTING Problem Not dispensing ice. Possible Causes Doors are not closed completely. Solutions Ice will not dispense if any of the refrigerator doors are left open. Infrequent use of the dispenser. Infrequent use of the ice dispenser will cause the cubes to stick together over time, which will prevent them from properly dispensing. Check the ice bin for ice cubes clumping/sticking together. If they are, break up the ice cubes to allow for proper operation.
TROUBLESHOOTING 49 Problem Not dispensing water. Possible Causes Solutions New installation or water line recently connected. Dispense 2.5 gallons (9 litters) of water (flush for approximately 5 minutes) to remove trapped air and contaminates from the system. Do not dispense the entire 2.5 gallons (9 litters) amount continuously. Depress and release the dispenser pad for cycles of 30 seconds ON and 60 seconds OFF. The dispenser panel is locked.
TROUBLESHOOTING Problem Possible Causes Ice has bad taste or odor. Water supply contains minerals such as sulfur. Solutions A water filter may need to be installed to eliminate taste and odor problems. NOTE: In some cases, a filter may not help. It may not be possible to remove all minerals / odor / taste in all water supplies. Icemaker was recently installed. Discard the first few batches of ice to avoid discolored or bad tasting ice. Ice has been stored for too long.
TROUBLESHOOTING Problem Possible Causes 51 Solutions Icemaker is Icemaker shutoff (arm/sensor) making too much is obstructed. ice. Empty the ice bin. If your icemaker is equipped with an ice shutoff arm, make sure that the arm moves freely. If your icemaker is equipped with the electronic ice shutoff sensor, make sure that there is a clear path between the two sensors. Reinstall the ice bin and wait 24 hours to confirm proper operation.
TROUBLESHOOTING Problem Pulsating or High-Pitched Sound Possible Causes Solutions Your refrigerator is designed Normal Operation to run more efficiently to keep your food items at the desired temperature. The high efficiency compressor may cause your new refrigerator to run longer than your old one, but it is still more energy efficient than previous models. While the refrigerator is running, it is normal to hear a pulsating or high-pitched sound.