User guide

13
INSTALLATION
2
After disconnecting the water feed tube,
open the left door. Remove the screw
from the hinge cover at the top of the
refrigerator. Lift the hook (not visible),
located at the bottom of the front side of
the cover with a flat-head screwdriver.
3
Remove the cover and pull out the tube .
Disconnect all wire harnesses
.
4
Rotate the hinge lever counterclockwise
. Lift the top hinge free of the hinge
lever latch.
Hinge Lever Latch
5
Lift the door from the middle hinge pin and
remove the door.
CAUTION
Place the door, inside facing up, on a
non-scratching surface.
CAUTION
When lifting the hinge free of the latch, be
careful that the door does not fall forward.