ENGLISH User Guide LG-W110 MFL68742611 (1.0) www.lg.
ENGLISH User Guide
Table of contents Safety information...............................................4 Getting started ..................................................11 Charging the battery........................................11 G Watch R operating time...............................13 Turning the G Watch R on and off.....................13 Turning the G Watch R on...............................14 Turning the G Watch R off...............................14 Connecting the G Watch R to a mobile device...14 Before pairing.
Always-on screen............................................39 Airplane mode..................................................39 Power off.........................................................40 Restart.............................................................40 Reset device....................................................40 Change watch face..........................................40 About...............................................................41 About this user guide......................
Safety information Before turning on your product, review the basic safety information provided here. General safety & handling While using your product, be aware of the following guidelines. Your environment • Safe operating temperatures. Use and store your product in temperatures between 0°C/32°F and 40°C/104°F. Exposing your product to extremely low or high temperatures may result in damage, malfunction, or even explosion. • While driving. When driving a car, driving is your first responsibility.
and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Do not attempt to repair or modify or remanufacture the product. It is equipped with an internal rechargeable battery, which should be replaced only by LG or an authorised LG repair center. Do not open, disassemble, crush, bend or deform, puncture, or shred the product. Do not insert foreign objects into the product.
Battery warnings Do not disassemble or open crush, bend or deform, puncture or shred. Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, expose to fire, explosion or other hazard. Only use the battery for the system for which it is specified. Only use the battery with a charging system that has been qualified with the system per CTIA Certification Requirements for Battery System Compliance to IEEE1725.
SALT SALT Do not immerse the product in salt water, such as sea water. SOAP SOAP Do not immerse the product in hot spring. Do not swim wearing this product. SALT SALT Do not use the product underwater. SOAP SOAP SALT SOAP • • • • • Do not place the product directly on sand (such as at a beach) or mud. Once the product gets wet, water may remain in gaps of the main unit. Shake the product well to drain water. Even after water is drained, the inner parts might be still wet.
Exposure to radio frequency energy Radio wave exposure and Specific Absorption Rate (SAR) information. This product has been designed to comply with applicable safety requirements for exposure to radio waves. These requirements are based on scientific guidelines that include safety margins designed to assure the safety of all persons, regardless of age and health. • The radio wave exposure guidelines employ a unit of measurement known as the Specific Absorption Rate, or SAR.
• • • • Place calls when you are not moving or before pulling into traffic. Try to plan calls when you will not be driving. Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations that have the potential to divert your attention from the road. Use your mobile product to help others in emergencies.
Disposal of your old appliance 1 All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 2 The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.
Getting started Once you have connected the G Watch R to your mobile device, you can use it to do the following: • Save and review notes, as well as set reminders or alarms • Send and receive text messages and emails more conveniently • Navigate to a desired destination. • Help to monitor your health; all this and more with just a few spoken words or taps on the screen. Charging the battery Before you use the G Watch R for the first time, you should charge the battery.
1 Locate the charging terminals on both the G Watch R and the charging cradle. Charging terminals  Note: The charging cradle is designed to only be used with the G Watch R and may not be compatible with other devices. 2 Place the G Watch R on the charging cradle and make sure that the charging terminals are aligned with each other.
3 Plug the small end of the USB cable provided into the charging cradle's USB port. 4 Plug the travel adapter into an electrical outlet. Important! • The touch screen may not function if the power to the G Watch R is unstable while charging. • The G Watch R may become warm while charging. This is normal. If the battery becomes hotter than usual, disconnect the charger. 5 Once the G Watch R battery is fully charged, disconnect the device from the charging cradle.
Turning the G Watch R on Turn the G Watch R on by pressing and holding the Power button (on the right-hand side of the device) for a few seconds. The screen lights up and the LG Logo is displayed. Power button  Turning the G Watch R off 1 Turn the G Watch R off by pressing and holding the Power button and then tapping Power off. 2 When you see the Power off: Are you sure? prompt, tap .
Google Play services app version 5.0.89 or above Google Search app version 3.6.14 or above Android Wear app version 1.0.1 or above 5 If you're pairing your watch for the first time, make sure your smartphone/tablet is connected to mobile data or Wi-Fi. A data connection is required to complete the setup. Keep the watch connected to the power supply during setup. Final check • Make sure the Android Wear app is installed on the smartphone/tablet.
3 Open the Android Wear app on your smartphone/tablet. A list of nearby devices will be displayed on your smartphone/ tablet. Touch your watch's name, which can be found on its screen. 4 A pairing code will be displayed on your smartphone/tablet and watch. Check that the codes match. Tap to begin pairing. 5 Touch Pair on your smartphone/tablet.
6 The pairing process is completed. Follow the tutorial to learn how to navigate on the G Watch R. After pairing To have the best G Watch R experience, you need to turn on Google Now, Location, and Contact recognition on the smartphone/tablet. • Google Now for information when you need it without searching. For example, see today’s weather, check your flight status, and find out if there’s traffic on the way to work. • Location for navigation, local suggestions (like restaurants and traffic), and more.
1 Open the Android Wear app and configure the Google Now settings on the paired smartphone/tablet by following the tutorial. OR Tap Apps > Google Settings > Search & Now. Turn on the Google Now switch . OR 2 Tap NEXT and choose your Google account (if necessary).
3 Scroll right down to the bottom, then tap the Menu icon Settings > Accounts & privacy. 4 Place a checkmark > next to Contact recognition.
5 Scroll up and then tap Google location settings > Mode. Select High accuracy (GPS and networks). Connecting to another mobile device Before you can connect your G Watch R to another device, you must first delete all your data from the G Watch R's memory by resetting it. Resetting the watch 1 Make sure your G Watch R is turned on, then press and hold the Power button until the Settings menu is displayed. 2 Swipe up until you see the Reset device option and tap it. Then tap .
Basics G Watch R features and controls Display Power button Microphone Touch screen The G Watch R's touch screen displays device status information, notifications and application-related information. You can access the G Watch R's features, settings and apps by touching and swiping the screen. Power button You can use the Power button to turn the G Watch R on or off, display the Settings menu. • While the watch is off, press and hold the Power button for several seconds to turn it on.
Charging Terminals Charging terminals Charging Cradle Heart rate sensor Charger/USB Port Warning Do not close or push the hole with anything sharp. Doing so may cause your device to work improperly.
Opening and closing the strap 1 If closed, open the clasp (as displayed below). 2 Adjust the strap to fit your wrist using the clasp pins as guides.
3 Close the clasp. Using the touch screen Important! The touch screen must not come into contact with any other electrical devices. Electrostatic discharges can result in the touch screen malfunctioning. Viewing status icons Status icons are displayed at the top of the watch face screen.
NOTE: The G Watch R may not recognize touch inputs made close to the screen's edges and outside the touch input area. Tapping Display a menu, select a menu option, open an application or press a displayed button by tapping with one finger. • For example: While the watch face is displayed, tap the screen to launch Google Voice Search feature. Swiping • Access card actions by swiping from right to from right to left across the screen. • Remove a card by swiping from left to right across it.
Features list From the Features list, you can: • Access the G Watch R's features • Monitor your mobile device's apps for text messaging and email, and compose new text and email messages • Navigate to your desired destination • Change some settings on the G Watch R, and more. You can access the G Watch R's Features list from the watch face. It is voice and touch screen compatible. NOTE: See Using Features for more information.
OR Swipe through the Features list and tap Start.... The Applications list is displayed. Opening an app 1 From the Applications list, highlight the app you want to open by swiping up and/or down across the screen. 2 Open the app by tapping the app icon. Closing the current app • Close the current app by swiping it from left to right.
Using Features Take a note You can dictate notes to yourself using the Voice Memo app. 1 Tap the watch face or say "Ok Google". You will see the Speak now prompt. 2 Say "Take a note". 3 Note? is displayed, followed by a prompt to Speak now. 4 Dictate the note as desired. The app changes the words you speak into text. When you have finished speaking, your text note is saved to Google Keep on your mobile device. NOTE: Read your notes by opening Google Keep on your mobile device.
Show me my heart rate You can use the Heart Rate app to measure and record your current heart rate. NOTE: The device's heart rate measurement feature is not to be used for clinical or medical diagnosis. Follow the guidelines in Wearing the G Watch R and Ensuring accurate measurements to make sure your heart rate measurements are accurate. Ensuring accurate measurements Heart rate readings may be inaccurate depending on the conditions and surroundings.
the Speak now prompt. 3 Say the name of the contact you want to send a text message to. 4 You will be prompted to say the message you want to send. 5 Send your message. Email Your G Watch R can be used to write emails as well as read emails received on your mobile device. 1 Tap the watch face or say "Ok Google". You will see the Speak now prompt. 2 Say "Email". OR Swipe through the Features list and tap Email. You will see the email message navigation screen.
Navigate You can find your way to a selected destination using the G Watch R. 1 Tap the watch face or say "Ok Google". You will see the Speak now prompt. 2 Say "Navigate". OR Swipe through the Features list and tap Navigate. You will be prompted to create a Navigate command. Set a timer The G Watch R can be used as a countdown timer. 1 Tap the watch face or say "Ok Google". You will see the Speak now prompt. 2 Say "Set a timer". OR Swipe through the Features list and tap Set a timer.
Set an alarm Multiple alarms can be set on your G Watch R. 1 Tap the watch face or say "Ok Google". You will see the Speak now prompt. 2 Say "Set an alarm". OR Swipe through the Features list and tap Set an alarm. 3 Find the desired alarm time by swiping up or down. A list of times in 15-minute increments is displayed. Show alarms 1 Tap the Watch screen or say "Ok Google". You will see the Speak now prompt. 2 Say "Show alarms". OR Swipe through the Features list and tap Show alarms.
• • Reset device: Your current data is deleted from the G Watch R and it is ready to connect to another mobile device. Change watch face: Take a look at the available watch faces and tap the desired one.
Using applications Accessing the Start menu 1 Tap the watch face or say "Ok Google". You will see the Speak now prompt. 2 Say "Start...". OR Swipe through the Features list and tap Start. The Applications list is displayed. Launching an app Voice method 1 From the watch face, say "Ok Google". 2 Say "Start..." followed by the app name. • For example, say "Start Fit". Touch method 1 From the Applications list, swipe up or down across the screen to locate the desired app. 2 Centre the app in the screen.
Swipe through the Features list and tap Start... > Fit. You will see the Step count page. 3 Display the Heart Rate page by swiping from right to left across the Step count page. 4 Start measuring your Heart Rate by tapping the Heart icon. (See Show me my heart rate for more information.) Fit settings The Fit settings can be viewed and changed in accordance your own personal fitness goal. 1 Tap the watch face or say "Ok Google". You will see the Speak now prompt. 2 Say "Start Fit".
Using Android Wear Android Wear lets you connect your G Watch R to a mobile device. It also enables you to customize your G Watch R's settings and apps. Android Wear can be used to access the features of the connected mobile device. Installing Android Wear See Connecting the G Watch R to a mobile device for more information. Launching Android Wear NOTE: Some Android Wear features may not be available depending on the type of device paired with your watch.
2 Tap the icon for the feature or app you want. The pop-up will close and you will see the name of the new feature or app in the Voice actions list. Adding compatible apps You can carry out a search for apps which are compatible with your mobile device. 1 On the Android Wear app, under Voice actions, tap Browse suggested apps. 2 Download and install the desired app(s). 3 Change the apps for the desired voice actions as described in Changing a voice action setting.
• • 38 Help & Feedback: Displays help information for using Android Wear and allows you to send feedback to Google. About: Displays open source licenses, the terms of service, legal notices, privacy policy, and the app version.
Customising your G Watch R You can customize your G Watch R by changing how bright the display is, whether a watch face is displayed when your G Watch R is idle and what watch face you see when your G Watch R is active. See Using Android Wear for more information. Launching the Settings menu 1 From the watch face, say "Ok Google". When you see the Speak now prompt, say "Settings". OR Tap the Watch screen and swipe up until you see the Settings option, then tap it.
• From the Settings screen, tap Airplane mode and select to enable or disable the feature. Power off This setting turns your G Watch R off. 1 From the Settings screen, tap Power off. You will see a prompt where you must confirm you want to turn your G Watch R off. 2 Tap to turn your G Watch R off. Restart This setting restarts your G Watch R. 1 From the Settings screen, tap Restart. You will see a prompt where you must confirm you want to restart your G Watch R. 2 Tap to restart your G Watch R.
About Information about your G Watch R is displayed here. • From the Settings screen, tap About. You can view the Model, Software version, Serial number, Build number, Connection and Battery information. The following options are also available. • System updates: This makes sure the latest software is loaded on your G Watch R. • Regulatory information: Displays regulatory information. • Legal notices: Instructs you to see your mobile device for legal notices.
About this user guide About this user guide • • • • • • • You must read this manual carefully before using your product. This will ensure safe and correct use of your device. Some of the images and screenshots which appear in this guide may differ from those on your product. There may be discrepancies between your content and the final product, or software supplied by service providers or operators. This content may be subject to change without prior notice. Visit the LG website at www.lg.
Accessories The following accessories are available for use with your product (the items described below may be optional). Travel adapter Quick Start Guide USB cable Safety Information Guide Charging Cradle Note: • Always use genuine LG accessories. Failure to do this may void your warranty. • Accessories may vary by region.
