Owner's Manual

Operation

Features

Install

Water Dispenser

Please assemble the Valve Assembly after correctly

adjusting it with a Door Hole.

Filling of

Water Tank

Drinking

1. After turning the Handle Tank backward with the

Water Tank installed at the Door, Open the CapTank (Small)

and then fill water using a kettle etc.

* Fill water while watching a sight glass on the front

of the Water Tank.

* Water up to 3,0 L

can be filled.

2. Press and fix the Cap Tank (Small).

3. After filling spring water, fix the Handle Tank at

a proper position.

1. Press the Dispenser Pad with a cup.

2. If pressing the Pad, water inside of the Dispenser is supplied.

3. If slowly removing a cup from the Pad, water will not fall down.

Do not use other beverage (milk, juice, carbonated

beverage etc) than spring water. Especially beverage

including grain must not be used (may result in failure).

Fill with potable water only.

Dispenser Pad

Handle Tank

Water Tank

Drip Tray

Valve Assembly

Cap Tank (Small)

Cap Tank (Big)

Grille

GA-F3*9B*QA;

Models:

GA-F4*9B*QA

WARNING!