Owner's Manual

18
Operation
(1)
(2)
• Take out the twist ice maker, fill it up and put it
back to it’s original location.
Ice Making
Note
• Rotating the ice separation handle before ice is
fully frozen may cause the remaining water
drop into the ice storage bin to lump the ice
together.
• Take the ice out of the ice storage bin for use
but do not pour water into the ice storage bin
to freeze the water to ice. The ice storage bin
can be Frozen and broken.
• When the ice is full, it is designed for the ice to
fall to the bottom in case the ice storage bin
can not pulled out. Be careful not to store the
ice too full.
• Defrosting takes place automatically.
• The defrosting water flows down to the
evaporating tray and is evaporated automatically.
Defrosting
• Ice will be dropped into the ice
storage bin by rotating Ice
separation handle of ice making
compartment.
• You can make ice and also use
this space as a storage space for
Frozen food. Removing (1)
(Twist ice maker) as shown in
the picture.
Dispenser Pad
Knob
(Open/Close)
Cap Assembly
Tank
Cap Tank
Clamp
Water Tank
Features
Water Dispenser (Optional)
1. Turn the knob shutter to open.
And pull out the water tank assembly. After
unlocking the clamp, open the cap tank and
then fill water using a kettle etc.
2. After filling potable water, fix the cap cover and
then lock the clamp.
3. When long period does not use or the first use,
You have to fill the water tank with over 1L
water.
Filling of WATER TANK