Owner's Manual

25
Care and maintenance
Be sure to unplug the power.
Always remove power cord from the wall outlet prior to cleaning in the
vicinity of electrical parts (lamps, switches, controls, etc.).
Wipe up excess moisture with a sponge or cloth to prevent water or
liquid from getting into any electrical part and causing an electric shock.
Never use metallic scouring pads, brushes, coarse abrasive cleaners,
strong alkaline solutions, flammable or toxic cleaning liquids on any
surface.
Do not touch frozen surfaces with wet or damp hands, because damp
object will stickor adhere to extremely cold surfaces.
For products with a stainless steel exterior, use a clean sponge or soft cloth
and a mild Detergent in warm water.
Do not use abrasive or harsh cleaners.
Dry thoroughly with a Soft cloth.
Do not use appliance wax, bleach, or other products containing chlorine on
stainless steel.
Energy-Saving Method
• Install the fridge in a shady,cool and well-ventilated place.
• Do not open and close the door frequently if not necessary.
• Please do not keep the door open for a long time, close door in the shortest
time.
• Allow hot food to cool prior to storing
• Too much food are not advised to be put in. Enough space should be kept
for cool air circulating freely.
• Do not set the temperature of refrigerator lower than needed. Do not set the
temperature of refrigerator lower than needed.Do not put the food near the
temperature sensor.
• Food need’t store is not advised to be put in.
• Place the deep-frozen food for thawing intorefrigerator; they can be used for
cooling the refrigerator.（Applicabe to some models only）
• Clean up the back cover and anti-condensation pipe termly (once a year) to
make sure heat exchange in gear.（Applicabe to some models only）
• Do not block air vents with food.（ Applicabe to some models only